From: Frank Barknecht Subject: Re: Quattro woes or: What does "SNDRV_PCM_IOCTL_START failed" mean? Date: Tue, 11 Mar 2003 19:02:10 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20030311180209.GC1812@fliwatut.scifi> References: <20030310223321.GA10836@fliwatut.scifi> <20030311103209.GA4139@fliwatut.scifi> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Hallo, Takashi Iwai hat gesagt: // Takashi Iwai wrote: > make sure that you starting the jack with 48kHz and the period size > aligned to 48, such as 48, 96, 192... Sorry, but I do not understand this fully. First, I'd rather like to run at 44.1 kHz, because that's a bit less computation for the softsynth I'm using. Will this lead to problems? I can live with a bit higher latency. Second: the alsa driver of jack has these options: alsa PCM driver args: -d alsa-pcm-name (default: default) -r sample-rate (default: 48kHz) -p frames-per-period (default: 1024) -n periods-per-hardware-buffer (default: 2) I had to run with "-n 3", with "-n 2" jack wouldn't start. The period size you mentioned must be "-p frames-per-period", if I'm right? So if running with 44.1 kHz, should I use something like "-p 1025" where 41*25 = 1025? But this doesn't work with Pd, which expects powers of 2... ciao -- Frank Barknecht _ ______footils.org__ ------------------------------------------------------- This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en