From: Robert Schwebel Date: Mon, 7 Apr 2003 07:00:56 +0200 Subject: [U-Boot-Users] [OT] cs8900 in u-boot Message-ID: <20030407050056.GL10694@pengutronix.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, this is somewhat offtopic, but I know no better place to ask. I'm trying to make the cs8900 ethernet chip on the Cogent CSB226 work with u-boot and Linux. The chip is mapped to 0x08000000 / CS2 and it is connected in I/O mapped mode. However, I do not see anything usefull in u-boot. This is how the port area looks after power on: uboot> md.w 0x08000000 10 (1) (2) (3) 08000000: 0000 a1ff 0000 a1ff 0009 a1ff 0000 a1ff ................ 08000010: 0000 a1ff 3136 a1ff 00d6 a1ff 00d6 a1ff ....61.......... I would have expected the cs8900's magic number (0x0e62 00[03|05]) in the data registers (2),(3). However, when I write 0 to the Packet Page Pointer Port (1) to select register 0: uboot> md.w 0x08000000 10 08000000: 0000 a1ff 0000 a1ff 3109 a1ff 0000 a1ff .........1...... 08000010: 0000 a1ff 3136 a1ff 00d6 a1ff 00d6 a1ff ....61.......... this is still not what I would have expected. It's especially strange that every second register contains 0xa1ff. Did anybody else see something different? Is the u-boot driver working for anyone? Cheers, Robert -- Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de Pengutronix - Linux Solutions for Science and Industry Braunschweiger Str. 79, 31134 Hildesheim, Germany Handelsregister: Amtsgericht Hildesheim, HRA 2686 Phone: +49-5121-28619-0 | Fax: +49-5121-28619-4 Visit us at the Hannovermesse 2003 (07.-12.04.)! Hall 6, Booth K11