From: Gregoire Favre Subject: Re: How to put 16bit none audio PCM data stream into a 32bit none audio S/P-DIF transport stream? Date: Tue, 8 Apr 2003 18:42:41 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20030408164241.GA4253@ulima.unil.ch> References: <20030408140230.GA1987@ulima.unil.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Return-path: Content-Disposition: inline In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Takashi Iwai Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org On Tue, Apr 08, 2003 at 05:50:48PM +0200, Takashi Iwai wrote: > i'm afraid that it's not so easy as it sounds. it strongly depends > on the hardware driver implementation... >=20 > about AC3, 32bit spdif is likely irrelevant. A52 (AC3) is usally > packed into normal 16bit frames. >=20 > does the click happen even if you use alsa-tool's ac3dec? Yes and no: ./ac3dec -C /data/linux/dvb/from_beyond_the_edge_44k_256kbps.ac3 don't produce any sound at all now... except ONE big click at the beginning, same with -P and ./ac3dec -R /data/linux/dvb/from_beyond_the_edge_44k_256kbps.ac3 5.1 Mode 44.1 KHz 256 kbps Complete Main Audio Service Using PCM device 'iec958:AES0=3D0x0,AES1=3D0x82,AES2=3D0x0,AES3=3D0x2' Produces also the same big click and then plays quiete good (only 2.0 no dolby digital is sent to the receiver...). Thank you very much, Gr=E9goire ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch ------------------------------------------------------- This SF.net email is sponsored by: ValueWeb: Dedicated Hosting for just $79/mo with 500 GB of bandwidth! No other company gives more support or power for your dedicated server http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/