From: Gregoire Favre Subject: Re: How to put 16bit none audio PCM data stream into a 32bit none audio S/P-DIF transport stream? Date: Tue, 8 Apr 2003 22:44:25 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20030408204425.GA6940@ulima.unil.ch> References: <20030408140230.GA1987@ulima.unil.ch> <20030408164241.GA4253@ulima.unil.ch> <3E933167.6010300@superbug.demon.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Return-path: Content-Disposition: inline In-Reply-To: <3E933167.6010300@superbug.demon.co.uk> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: James Courtier-Dutton Cc: Takashi Iwai , alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org On Tue, Apr 08, 2003 at 09:30:31PM +0100, James Courtier-Dutton wrote: > On my SB Live, with AC3 I use: - > PCM device "iec958:AES0=3D0x6,AES1=3D0x82,AES2=3D0x0,AES3=3D0x2" >=20 > On your example AES0=3D0x0, whereas I have AES0=3D0x6. > It is AES0 which sets the non-audio bits in the SPDIF. Exactly, it's what I also got with other option to obtain ac3... I have tested lots of option (and other users also have, as reported to this list) and with ac3 receivershich uses the bit flags of the S/P-DIF transport stream for identifying none audio loose :-( Of course I only speak for cs46xx. Either no sound, or only cliking sound... Thank you very much, Gr=E9goire ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch ------------------------------------------------------- This SF.net email is sponsored by: ValueWeb: Dedicated Hosting for just $79/mo with 500 GB of bandwidth! No other company gives more support or power for your dedicated server http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/