From: Anders Torger Subject: Re: Digi96 Full Duplex problem with 16bit samples Date: Tue, 22 Apr 2003 18:16:08 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <200304221816.08151.torger@ludd.luth.se> References: <02d301c308e4$120d8ef0$cb40a8c0@FRiskMan.com> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <02d301c308e4$120d8ef0$cb40a8c0@FRiskMan.com> Content-Disposition: inline Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Edward Wildgoose , alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Unfortunately, the analog part of my Digi96/8 PAD is broken (I only get noise), so I cannot test that it really works, however, I tried running these two commands at the same time: cat /dev/zero | aplay -D 'hw:0' -f S16_LE -c 2 -r 44100 arecord -D 'hw:0' -c 2 -r 44100 -f S16_LE > /dev/null and it worked without complaints. Not much help... but I guess I can at least say that it is unlikely to be a problem in the rme96 driver. /Anders Torger On Tuesday 22 April 2003 17.30, Edward Wildgoose wrote: > I have a new Digi96/8 PAD card (very impressed with the sound > quality), however, I am trying to use it with MythTV to record and > playback TV. Either analogue recording or playback work fine, but any > attempt to do simultaneous analogue record AND playback is failing. > > I have tested with aplay + arecord and the card does full duplex > analogue without a problem. The only difference with MythTv seems to > be that it uses OSS emulation via the /dev/dsp device (this is this > OSS isn't it?). To try and simulate this I tried the following: > > gentoo linux-2.4.20 # sox -t ossdsp -r 44100 -w -c 2 /dev/dsp -t > ossdsp -r 44100 -w -c 2 /dev/dsp > > Which gives the error: > sox: Unable to set the sample size to 16 > > If however, I remove the "-w" flag from the above then everything > works OK. It appears that full duplex works in 8 bit mode, but not 16 > bit mode? > > Can anyone confirm or deny this, and is there a workaround to get > full duplex (other than coding up a proper ALSA layer for MythTv)? I > am using alsa 0.92 and I have also tried 0.90rc6 (and it's on gentoo > if this makes a difference). > > Any help would be appreciated, ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf