From: Lucas Correia Villa Real Subject: Invalid argument with snd_pcm_hw_params Date: Sat, 17 May 2003 13:02:44 -0300 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <200305171300.06149.lucasvr@gobolinux.org> Mime-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_k0lx+Hcwx+WhLs2" Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org --Boundary-00=_k0lx+Hcwx+WhLs2 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Hi, I'm porting one application of mine that used OSS, but I'm in trouble with the 'invalid argument' message I always get when calling snd_pcm_hw_params(). Also, I couldn't use buffers of 1024 bytes: it aborts on snd_pcm_hw_params_set_period_size() with the same error. Attached follows the relevant portion of the code. Some definitions used on the code: from my alsa.h file: #define DSP_BUFFER_SIZE 2048 #define MONO 1 #define STEREO 2 #define AUDIO_DEVICE "plughw:0,0" Thanks a lot for your attention. Any help is very appreciated. Lucas --Boundary-00=_k0lx+Hcwx+WhLs2 Content-Type: text/x-csrc; charset="us-ascii"; name="alsa_open.c" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="alsa_open.c" #include "wrappers.h" #include "util.h" #include "alsa.h" snd_pcm_t * ALSA_open_dsp (char *device, int mode) { int preferred_format, dir, retval, i; int sampling_rate, ssampling_rate, frag_count, val; int channels; int format[6] = { SND_PCM_FORMAT_S16_LE, SND_PCM_FORMAT_S16_BE, SND_PCM_FORMAT_U16_LE, SND_PCM_FORMAT_U16_BE, SND_PCM_FORMAT_U8, SND_PCM_FORMAT_S8 }; snd_pcm_t *pcm_handle; snd_pcm_hw_params_t *hwparams; snd_pcm_stream_t stream = SND_PCM_STREAM_CAPTURE; snd_pcm_uframes_t periodsize; /* allocate the snd_pcm_hw_params structure on the stack */ snd_pcm_hw_params_alloca (&hwparams); /* try to open the device using 'mode' (usually O_RDONLY) */ if ((retval = snd_pcm_open (&pcm_handle, device, stream, mode)) < 0) { fprintf (stdout, "snd_pcm_open: %s\n", snd_strerror(retval)); return NULL; } /* init hwparams with full configuration space */ if ((retval = snd_pcm_hw_params_any (pcm_handle, hwparams)) < 0) { fprintf (stdout, "snd_pcm_hw_params_any: %s\n", snd_strerror(retval)); return NULL; } /* set access type */ if ((retval = snd_pcm_hw_params_set_access (pcm_handle, hwparams, SND_PCM_ACCESS_RW_INTERLEAVED)) < 0) { fprintf (stdout, "snd_pcm_hw_params_set_access: %s\n", snd_strerror(retval)); return NULL; } /* select the best supported mode (listed on 'format') */ for (preferred_format = -1, i = 0; i < 6; ++i) if (! snd_pcm_hw_params_test_format (pcm_handle, hwparams, format[i])) { preferred_format = format[i]; break; } if (preferred_format < 0) { fprintf (stderr, "Could not find a supported mode for your soundcard.\n"); return NULL; } /* select the audio sample format */ if ((retval = snd_pcm_hw_params_set_format (pcm_handle, hwparams, preferred_format)) < 0) fprintf (stdout, "snd_pcm_hw_params_set_format: %s\n", snd_strerror(retval)); /* set the sampling rate */ ssampling_rate = sampling_rate = 44100; if ((retval = snd_pcm_hw_params_set_rate_near (pcm_handle, hwparams, &ssampling_rate, &dir)) < 0) { fprintf (stdout, "snd_pcm_hw_params_set_rate_near: %s\n", snd_strerror(retval)); return NULL; } if (dir && ssampling_rate != sampling_rate) { fprintf (stdout, "The rate %d Hz is not supported by %s device, using %d Hz instead.\n", sampling_rate, device, retval); sampling_rate = retval; retval = snd_pcm_hw_params_set_rate_near (pcm_handle, hwparams, &sampling_rate, 0); if (retval < 0) { /* sorry */ fprintf (stdout, "snd_pcm_hw_params_set_rate_near: %s\n", snd_strerror(retval)); return NULL; } } /* set the number of channels (mono/stereo) */ channels = MONO; if ((retval = snd_pcm_hw_params_set_channels (pcm_handle, hwparams, channels)) < 0) { fprintf (stdout, "snd_pcm_hw_params_set_channels: %s\n", snd_strerror(retval)); return NULL; } /* set the number of periods and the buffer size to be used */ periodsize = (DSP_BUFFER_SIZE * channels) >> 2; if ((retval = snd_pcm_hw_params_set_period_size (pcm_handle, hwparams, periodsize, 0)) < 0) { fprintf (stdout, "snd_pcm_hw_params_set_period_size: %s\n", snd_strerror(retval)); return NULL; } /* get the maximum available periods */ frag_count = 16; if ((retval = snd_pcm_hw_params_get_periods_max (hwparams, &val, &dir)) < 0) { fprintf (stdout, "snd_pcm_hw_params_get_periods_max: %s\n", snd_strerror(retval)); return NULL; } if (val < frag_count) frag_count = val; if ((retval = snd_pcm_hw_params_set_periods (pcm_handle, hwparams, frag_count, dir)) < 0) { fprintf (stdout, "snd_pcm_hw_params_set_periods: %s\n", snd_strerror(retval)); return NULL; } if ((retval = snd_pcm_hw_params_set_buffer_size_near (pcm_handle, hwparams, &periodsize)) < 0) { fprintf (stdout, "snd_pcm_hw_params_set_buffer_size: %s\n", snd_strerror(retval)); return NULL; } /* apply HW parameter settings to the PCM device and prepare it */ if ((retval = snd_pcm_hw_params (pcm_handle, hwparams)) < 0) { fprintf (stdout, "snd_pcm_hw_params: %s\n", snd_strerror(retval)); return NULL; } snd_pcm_hw_params_free (hwparams); if ((retval = snd_pcm_prepare (pcm_handle)) < 0) fprintf (stdout, "snd_pcm_prepare: %s\n", snd_strerror(retval)); return pcm_handle; } --Boundary-00=_k0lx+Hcwx+WhLs2-- ------------------------------------------------------- This SF.net email is sponsored by: If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge