From: egel@scoutnet.nl Subject: How to get alsa 0.9.3 working with 2.4 kernels on Alpha; part 2t Date: Fri, 23 May 2003 11:35:45 GMT Sender: alsa-user-admin@lists.sourceforge.net Message-ID: <200305231135.h4NBZjM03144@explorer.scouting.nl> Return-path: Errors-To: alsa-user-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-user@lists.sourceforge.net Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org I got Alsa 0.9.3c finally build an loaded with kernel 2.4.20 with only " #include " in highmem.h #include #include added to acore/memory_wrapper.c #include added to misc.c , opl4_lib.c and opl4_proc.c and this patch: ---------------------------------------------- diff -Naur alsa-driver-0.9.3a/alsa-kernel/isa/sb/emu8000_patch.c alsa-driver-0. 9.3a-linux2420/alsa-kernel/isa/sb/emu8000_patch.c --- alsa-driver-0.9.3a/alsa-kernel/isa/sb/emu8000_patch.c 2002-08-12 03:43: 46.000000000 -0500 +++ alsa-driver-0.9.3a-linux2420/alsa-kernel/isa/sb/emu8000_patch. c 2003-05-18 15:50:53.000000000 -0500 @@ -233,7 +233,7 @@ /* we may take too long time in this loop. * so give controls back to kernel if needed. */ - if (need_resched()) { + if (ALSA_NEED_RESCHED()) { if (current->state != TASK_RUNNING) set_current_state(TASK_RUNNING); schedule(); diff -Naur alsa-driver-0.9.3a/alsa-kernel/isa/sb/emu8000_pcm.c alsa-driver-0.9. 3a-linux2420/alsa-kernel/isa/sb/emu8000_pcm.c --- alsa-driver-0.9.3a/alsa-kernel/isa/sb/emu8000_pcm.c 2003-02-10 05:53:49. 000000000 -0600 +++ alsa-driver-0.9.3a-linux2420/alsa-kernel/isa/sb/emu8000_pcm.c 2003-05-18 15:50:53.000000000 -0500 @@ -424,7 +424,7 @@ */ #define CHECK_SCHEDULER() \ do { \ - if (need_resched()) {\ + if (ALSA_NEED_RESCHED()) {\ if (current->state != TASK_RUNNING)\ set_current_state(TASK_RUNNING);\ schedule();\ diff -Naur alsa-driver-0.9.3a/include/adriver.h alsa-driver-0.9. 3a-linux2420/include/adriver.h --- alsa-driver-0.9.3a/include/adriver.h 2003-04-27 09:49:58.000000000 -0500 +++ alsa-driver-0.9.3a-linux2420/include/adriver.h 2003-05-18 15:50:53. 000000000 -0500 @@ -105,7 +105,9 @@ #endif #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 3) -#define need_resched() (current->need_resched) +#define ALSA_NEED_RESCHED() (current->need_resched) +#else +#define ALSA_NEED_RESCHED() (need_resched()) #endif #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 4) #include diff -Naur alsa-driver-0.9.3a/pci/vx222/vx222_ops.c alsa-driver-0.9. 3a-linux2420/pci/vx222/vx222_ops.c --- alsa-driver-0.9.3a/pci/vx222/vx222_ops.c 2003-03-21 11:41:57.000000000 -0600 +++ alsa-driver-0.9.3a-linux2420/pci/vx222/vx222_ops.c 2003-05-18 15:50:53. 000000000 -0500 @@ -376,7 +376,7 @@ if (put_xilinx_data(chip, port, 8, data) < 0) return -EINVAL; /* don't take too much time in this loop... */ - if (need_resched()) { + if (ALSA_NEED_RESCHED()) { if (current->state != TASK_RUNNING) set_current_state(TASK_RUNNING); schedule(); ---------------------------------------------- Thanks to Kelledin and the Axp-list@redhat.com but i'm stil getting this error when using alsaplayer: ALSA lib pcm_hw.c:324:(snd_pcm_hw_hw_params) SNDRV_PCM_IOCTL_HW_PARAMS failed: Cannot allocate memory Unable to install hw params: ACCESS: RW_INTERLEAVED FORMAT: S16_LE SUBFORMAT: STD SAMPLE_BITS: 16 FRAME_BITS: 32 CHANNELS: 2 RATE: 44100 PERIOD_TIME: (23219 23220) PERIOD_SIZE: 1024 PERIOD_BYTES: 4096 PERIODS: 8 BUFFER_TIME: (185759 185760) BUFFER_SIZE: 8192 BUFFER_BYTES: 32768 TICK_TIME: 976 failed to configure output device...trying OSS error setting sample_rate failed to configure output device...trying OSS And sfxload gives this error: pci_map_single failed:could not allocate dma page tables I'm using a 164SX ALPHA with Debian Woody and trying to use a emu10k1 What is the way to solve these problems ? Met Vriendelijke Zwerversgroeten Wouter Rademaker Snel-post: egel@scoutnet.nl \ / \ / >O< >O< *{_} {_}* ------------------------------------------ This message was sent by Scoutnet Webmail. http://www.scoutnet.nl ------------------------------------------------------- This SF.net email is sponsored by: ObjectStore. If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge