From: Martin Langer Subject: Re: problems with rme digi96/8 Date: Thu, 5 Jun 2003 21:03:35 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20030605190335.GB493@tuba.home> References: <1054808252.7022.8.camel@duff> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1054808252.7022.8.camel@duff> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Gorm David Lai Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org On Thu, Jun 05, 2003 at 12:17:32PM +0200, Gorm David Lai wrote: > Hi, I really hope somebody can help me. > > We have recently bought a RME Digi96/8 card. This connects via adat to a > mixing console. > I have implemented the code in the ALSA 0.9.0 HOWTO for playback. This > works fine on a sound blaster card in stereo. > However with the digi96/8 card the mixing console does not get any > input. The mixing console syncs fine on the adat connection, it just > does not seem to get any sound input. > > Any help, would be greatly appreciated as I am getting desperate. > ADAT isn't well tested, so everything is possible. But a look to wiki page on http://opensrc.org/alsa/index.php?page=rme96 looks not so bad. Are you using plughw:0,1 or hw:0,1? What's your alsa version? martin ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com.