From: Anders Torger Subject: Re: problems with rme digi96/8 Date: Wed, 11 Jun 2003 15:48:19 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <200306111548.19324.torger@ludd.luth.se> References: <1054808252.7022.8.camel@duff> <20030609172302.GA498@tuba.home> <1055337460.1392.45.camel@duff> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1055337460.1392.45.camel@duff> Content-Disposition: inline Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Gorm David Lai , Martin Langer Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Test this: aplay -D hw:0,1 -r 44100 -f S16_LE -c 8 /dev/zero it should work. It works on my card. The problem in your aplay -D hw:0,1 -c 8 ~/cavi/sound/01/01\ Track\ \ 1.wav is that aplay seems to ignore your -c 8, and reads the wav header instead, and sets it to stereo, as you can see in the aplay output, where it cleary says that it plays in "Stereo". /Anders Torger On Wednesday 11 June 2003 15.17, Gorm David Lai wrote: > I also have problems with aplay. Maybe this is related? > > The following command: > > aplay -D hw:0,1 -c 8 ~/cavi/sound/01/01\ Track\ \ 1.wav > > Which gives the following output: > > Playing WAVE '/users/lai/cavi/sound/01/01 Track 1.wav' : Signed 16 > bit Little Endian, Rate 44100 Hz, Stereo > aplay: set_params:810: Channels count non available > > > /Gorm > > > > ------------------------------------------------------- > This SF.net email is sponsored by: Etnus, makers of TotalView, The > best thread debugger on the planet. Designed with thread debugging > features you've never dreamed of, try TotalView 6 free at > www.etnus.com. _______________________________________________ > Alsa-devel mailing list > Alsa-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/alsa-devel ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com.