From: Anders Torger Subject: Re: problems with rme digi96/8 Date: Wed, 11 Jun 2003 16:15:56 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <200306111615.56664.torger@ludd.luth.se> References: <1054808252.7022.8.camel@duff> <200306111548.19324.torger@ludd.luth.se> <1055340198.1390.58.camel@duff> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1055340198.1390.58.camel@duff> Content-Disposition: inline Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Gorm David Lai Cc: Martin Langer , alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org On Wednesday 11 June 2003 16.03, Gorm David Lai wrote: > Thanks for the advice, though it still doesn't work. > It seems to play, and sets the right sync on the mixing console. The > console just doesn't get any input. > Do I have to unmute the card anywhere? Note that my example uses /dev/zero (zero input) so it should be silent. Put something with sound in it instead of /dev/zero. No, you shouldn't need to unmute the card (if you are not using analog output), the digital output is just digital, no volume control for it exists. A classical mistake is of course to connect ADAT input to ADAT input, but I suppose you have checked that. /Anders ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com.