From: Ross Miller Subject: Re: AudioTrak Optoplay... Date: Fri, 13 Jun 2003 00:22:45 -0600 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <200306130022.45973.miller@penguinstation.net> References: <200306021418.26840.miller@penguinstation.net> <200306060034.53324.miller@penguinstation.net> Reply-To: miller@penguinstation.net Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Takashi Iwai Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org On Friday 06 June 2003 02:35, Takashi Iwai wrote: > > > the changes were committed to cvs now, so please give a try. > > > > The changes you made allowed me to play sound through the device, but > > I still get those usb-check-bandwidth messages, regardless of whether > > or not I used the "nrpacks=3D2" option for the snd-usb-audio module. = Is > > there anything else we can try? The driver is usable as-is, but all > > those messages fill up the syslog pretty quick. > > to be sure, please check /proc/asound/card0/stream0 while playback > and how much URB packets are being used. > Sorry for the delay in getting back to you; work very rudely intruded on = my=20 life last week..;) Regarding your request, the relevant line from=20 stream0 looks like: URBs =3D 5 [ 2 2 2 2 2 ] Without the nrpacks=3D2 option, the URB line looks like: URBs =3D 5 [ 4 4 4 4 4 ] I should point out that things have apparently changed some in the last=20 week. Using the code I checked out of CVS just a few hours ago, I no=20 longer get continuous messages in the syslog. Instead I seem to get a fe= w=20 lines of those usb-check-bandwidth messages each time a new song is loade= d=20 by xmms. Then, while the song is playing, I will get occasional breaks i= n=20 the sound accompanied by a few messages in the syslog similar to the=20 following: Jun 12 23:36:58 snoopy kernel: usb.c: usb-check-bandwidth would have=20 FAILED: was 912, would be 1140, bustime =3D 228 us Jun 12 23:36:59 snoopy last message repeated 715 times Jun 12 23:36:59 snoopy kernel: usb-uhci.c: iso_find_start: gap in seamles= s=20 isochronous scheduling Jun 12 23:36:59 snoopy kernel: usb.c: usb-check-bandwidth would have=20 FAILED: was 912, would be 1140, bustime =3D 228 us Jun 12 23:37:19 snoopy last message repeated 10003 times Jun 12 23:37:19 snoopy kernel: usb-uhci.c: iso_find_start: gap in seamles= s=20 isochronous scheduling Jun 12 23:37:19 snoopy kernel: usb.c: usb-check-bandwidth would have=20 FAILED: was 912, would be 1140, bustime =3D 228 us Also, a dialog box will sometimes pop up saying "snd_pcm_wait: Input/outp= ut=20 error" -Ross ------------------------------------------------------- This SF.NET email is sponsored by: eBay Great deals on office technology -- on eBay now! Click here: http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5