From: Nathaniel Gray Subject: Re: [BUG] intel8x0: arecord doesn't work Date: Wed, 27 Aug 2003 12:26:19 -0700 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <200308271226.19663.n8gray@caltech.edu> References: Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Content-Disposition: inline Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Takashi Iwai Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org On Wednesday 27 August 2003 05:50 am, Takashi Iwai wrote: > At Wed, 27 Aug 2003 01:10:06 -0700, > > Nathan Gray wrote: > > I'm trying to record from the built-in mic in my laptop (Dell > > Inspiron 4150) but it doesn't seem to work right. If I select > > "Mic" as the capture source and max out the volume then when I tap > > the microphone I can hear it loud and clear in my headphones. Then > > I try: > > > > [n8gray@golux patches]$ arecord -d 5 foo.wav > > Recording WAVE 'foo.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono > > > > I tap the mic a few times as this is running. I hear the taps > > great while recording, but playing back foo.wav I just hear static, > > with the taps barely audible. Adjusting the recording levels > > doesn't change anything. > > what about hw:0,1 ? [n8gray@golux patches]$ arecord -D hw:0,1 -d 5 foo.wav Recording WAVE 'foo.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono arecord: set_params:809: Sample format non available I get the same result for -D intel8x0 and -D hw:0. -- >>>-- Nathaniel Gray -- Caltech Computer Science ------> >>>-- Mojave Project -- http://mojave.cs.caltech.edu --> ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf