From: Erik de Castro Lopo Subject: Re: Two sound cards, only sound out of one Date: Fri, 29 Aug 2003 12:18:33 +1000 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20030829121833.60c7d4e3.erikd-alsa@mega-nerd.com> References: <20030824121353.06de39c8.erikd-alsa@mega-nerd.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Clemens Ladisch Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Hi Clemens, Sorry for the delay in responding to this. On Mon, 25 Aug 2003 13:13:37 +0200 (METDST) Clemens Ladisch wrote: > The same happens with "hw:1" instead of "card1"? Hmm, I think this might be some interesting info: These two commands work: root@sound:~# aplay -vv -D hw:1 a.wav Playing WAVE 'a.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono Hardware PCM card 1 'Ensoniq AudioPCI' device 0 subdevice 0 root@sound:~# aplay -vv -D card0 a.wav Playing WAVE 'a.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono Hardware PCM card 1 'Ensoniq AudioPCI' device 0 subdevice 0 while these two don't: root@sound:~# aplay -vv -D hw:0 a.wav Playing WAVE 'a.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono Hardware PCM card 0 'Ensoniq AudioPCI' device 0 subdevice 0 root@sound:~# aplay -vv -D card1 a.wav Playing WAVE 'a.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono Hardware PCM card 0 'Ensoniq AudioPCI' device 0 subdevice 0 So obviously I have my definitions in /etc/asound.conf a little mixed up but I still have one card working and one not. > Is the output of "lspci -x" the same for both cards (except port and > irq settings)? Slightly different: 00:0a.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02) 00: 74 12 80 58 05 00 10 24 02 00 01 04 00 20 00 00 10: 01 a4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 74 12 00 20 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 0c 80 00:0d.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08) 00: 74 12 71 13 05 00 10 24 08 00 01 04 00 20 00 00 10: 01 94 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 74 12 71 13 30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 0c 80 > Are the mixer controls really exactly the same (run "alsactl store" > and look into /etc/asound.state)? Well I'm actually running two instances of alsamixergui using: alsamixergui -c 0 & alsamixergui -c 1 & The devices shown by the two instances are slightly different and the controls work independantly. Erik -- +-----------------------------------------------------------+ Erik de Castro Lopo nospam@mega-nerd.com (Yes it's valid) +-----------------------------------------------------------+ "The lusers I know are so clueless, that if they were dipped in clue musk and dropped in the middle of pack of horny clues, on clue prom night during clue happy hour, they still couldn't get a clue." --Michael Girdwood, in the monastery ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf