From: Pilo Subject: a ADAT input for SBlive... Please READ!!! :) Date: Fri, 29 Aug 2003 19:51:57 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <200308291951.57178.pilo.c@wanadoo.fr> Reply-To: pilo.c@wanadoo.fr Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org The emu10k1 (and emu10k2) are quite interesting chip : they have many=20 independant inputs and outputs. Under Windows, there is the KX driver whi= ch=20 can use this via ASIO : 16 input channels. all FX input, physical input(I= 2S,=20 SPDIF), fx output and physical output(I2S SPDIF) can be routed to each ot= her,=20 and so in a recording software we can have the 14 physical input which th= e=20 emu10k1 offer (2 SPDIF, 5 I2S). On a basic SBlive, there's 4 I2S which are not used. I am designing, with= =20 other people a ADC board (with PCM1804 ADC, which can work up to=20 24bit/192khz). The first test board works, under windows I have one more=20 stereo input, which can be recorded indenpendantly. The goal is to add a = ADAT=20 input (and maybe output) to the SBlive... which I think will be very easy= , as=20 Alesis sells ADAT chip for about $5... So yes, a ADAT daughter board for = the=20 SBlive can be VERY cheap. I know I can used this under windows, with very good latency... but we wa= nt it=20 to work under linux! We so need a new driver... like the KX driver under=20 windows... Can somebody help us on that? I think people from KX driver can help us, = as=20 their driver is free. (http://www.kxproject.com). Thanks you for reading ;) Pilo ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf