From: Lindsey Simon Subject: Re: Unable to turn fan on - Asus M3N - 2.6.0-test9bk4 Date: Tue, 4 Nov 2003 11:32:16 -0600 Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: <20031104173216.GH26114@austinchronicle.com> References: <20031101193817.GA19198@austinchronicle.com> <20031102174730.GB2819@krikkit> <3FA561F7.5030706@pca.it> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <3FA561F7.5030706-wlebWZzHoyE@public.gmane.org> Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Luca Capello Cc: ML ACPI-devel List-Id: linux-acpi@vger.kernel.org My FN00/state's change from on to off as well, but the fan doesn't actually turn on when the state says it's on. Do you insmod the fan module or not? I do, but maybe I shouldn't? Which of the ACPI modules do you turn on and which do you not? Maybe that's the ticket? Luca Capello in message Re: [ACPI] Unable to turn fan on - Asus M3N - 2.6.0-test9bk4 (Sun, 11/02 20:58): > Hello, > > on 11/02/03 18:47, Robert Vollmert wrote: > >are you sure the fan doesn't turn on? What kind of temperatures have > >you been seing? As Karol noted, the fan isn't controlled the way the > >spec intends (which would require implementing n fan devices for an > >n-level fan, I think). Instead, TCHG is called every time the > >temperature changes, which sets the fan speed directly based on some > >threshold temperatures which vary based on cooling mode > >(active/passive). That's the only place you can take influence wihtout > >modifying the DSDT, though changing the mode to passive will increase > >the thresholds. IIRC, these temperatures are quite high, though I don't > >remember exact values. In the region of 70?C, for the lowest, I think. > I think the fan is correctly managed, as you can see from my attached: > ===== > luca@gismo:~$ cat /proc/acpi/thermal_zone/THRM/temperature > temperature: 68 C > luca@gismo:~$ date > Sun Nov 2 20:50:06 CET 2003 > luca@gismo:~$ cat /proc/acpi/thermal_zone/THRM/temperature > temperature: 55 C > luca@gismo:~$ date > Sun Nov 2 20:52:44 CET 2003 > luca@gismo:~$ cat /proc/acpi/fan/FN00/state > status: on > luca@gismo:~$ cat /proc/acpi/fan/FN00/state > status: off > luca@gismo:~$ > ===== > > The temperature went high compiling the kernel, but suddenly the fan > went on and at high RPM (I could hear it), just for 5min and then it > went normal again. > > I have always the 'os_wait_semaphore' problem, but, as Karol said in > another post, this doens't cause any big problems, just the already > reported keyboard bug (for less than 5min you can't type anything or if > you were typing sometimes it's as if you go on typing the last character). > > Thx, bye, > Gismo / Luca > > > > ------------------------------------------------------- > This SF.net email is sponsored by: SF.net Giveback Program. > Does SourceForge.net help you be more productive? Does it > help you create better code? SHARE THE LOVE, and help us help > YOU! Click Here: http://sourceforge.net/donate/ > _______________________________________________ > Acpi-devel mailing list > Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org > https://lists.sourceforge.net/lists/listinfo/acpi-devel ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/