From: nyet at mrv.com Date: Fri, 14 Nov 2003 09:58:49 -0800 Subject: [U-Boot-Users] RxD, environment in flash not loaded... In-Reply-To: References: Message-ID: <20031114175849.GA12928@orca.chats.mrv.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Yup. This is still a problem for many boards. Wolfgang this is the one we discussed a long time ago. On Fri, Nov 14, 2003 at 07:49:53PM +0200, Richard Klingler wrote: > > > > You mean by pre-defining the bootcmd setting you solved a SCC2 problem? > > Really?? > > Ah nope (o; changed some fcc bits.... > > > > > > Also strange is that with CFG_ENV_IS_IN_FLASH defined it didn't > > > say anything about wrong crc. But it is saving the environment > > > settings correctly to flash... > > > > Where is the problem? With an embedded environment U-Boot is expected > > to build a valid CRC checksum, too. > > > > The problem is that after reset it always reverts to the same > default settings and ignores the ones saved to the flash... > > > rick > > > > ------------------------------------------------------- > This SF. Net email is sponsored by: GoToMyPC > GoToMyPC is the fast, easy and secure way to access your computer from > any Web browser or wireless device. Click here to Try it Free! > https://www.gotomypc.com/tr/OSDN/AW/Q4_2003/t/g22lp?Target=mm/g22lp.tmpl > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users