From: Ducrot Bruno Subject: Re: [SPEEDSTEP] ALi shouthbridge. alpha tester wanted. Date: Mon, 17 Nov 2003 20:39:47 +0100 Sender: cpufreq-bounces+glkc-cpufreq=gmane.org@www.linux.org.uk Message-ID: <20031117193947.GV32464@poupinou.org> References: <20031106140935.GC21970@poupinou.org> <200311131404.31398.lardel@interia.pl> Mime-Version: 1.0 Return-path: Content-Disposition: inline In-Reply-To: <200311131404.31398.lardel@interia.pl> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: cpufreq-bounces+glkc-cpufreq=gmane.org@www.linux.org.uk Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Rafal Dejewski Cc: cpufreq ML On Thu, Nov 13, 2003 at 02:04:31PM +0100, Rafal Dejewski wrote: > On Thursday 06 November 2003 15:09, Ducrot Bruno wrote: > > Can someone please test > > ftp://ftp.poupinou.org/cpufreq/speedstep-ali.trunk.diff > > > Hi! > Tried this on HP VT6200 notebook with P4M at 1700MHz running 2.6.0-test9 with > APM (without ACPI). > > Here is my dmesg output after "modprobe speedstep_ali": > cpufreq: read at pmbase 0x8000 + 0x2f returned 0x1 > cpufreq: writing 0x1 to pmbase 0x8000 + 0x50 > cpufreq: read at pmbase 0x8000 + 0x50 returned 0x1 > cpufreq: change to 1700 MHz succeeded > cpufreq: read at pmbase 0x8000 + 0x2f returned 0x1 > cpufreq: writing 0x0 to pmbase 0x8000 + 0x50 > cpufreq: read at pmbase 0x8000 + 0x50 returned 0x0 > cpufreq: change to 1700 MHz succeeded > > It didn't create cpufreq directory on /sys/devices/system/cpu/cpu0 as > p4-clockmod does, so I don't know what to do next... > Can you please send me the output of lspci -xxx, thanks, -- Ducrot Bruno -- Which is worse: ignorance or apathy? -- Don't know. Don't care.