From: Anthony Subject: envy24control Date: Sun, 30 Nov 2003 02:03:44 -0600 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20031130080344.GA22096@ice_nine.wi.rr.com> Reply-To: avan@uwm.edu Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Hi. The envy24control has undergone some significant changes, most of which are good. But I no longer understand how to set levels. It used to be that 111 on the on ADC level was -10Db and the top was +4db I think. Now there is a separate input gain. I am completely unable to set the levels to reasonable values on my delta44. Of course, I probably just need to play around, but everything is either way too hot or far too low. Before, things seemed perfectly neutral. On my 1010 I don't have these sliders, which makes sense because of the external buttons for selecting levels. On that card the levels are perfect. I really would rather just have a toggle button for the input gain. I *think* this is how the windows interface works. I'd be willing to patch it if I knew what values made sense. In addition the levels which feed channels into the digital mixer seem far too sensitive. A very small change almost kills the signal. Perhaps these need to be rescaled? Thanks for you time. --ant ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/