From: Steven Ihde Subject: Re: error during raid config Date: Fri, 16 Jan 2004 10:26:07 -0800 Sender: linux-raid-owner@vger.kernel.org Message-ID: <20040116182607.GA31026@hamachi.dyndns.org> References: <011620041818.1453.804@comcast.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <011620041818.1453.804@comcast.net> To: gannan10@comcast.net Cc: linux-raid@vger.kernel.org List-Id: linux-raid.ids On Fri, Jan 16, 2004 at 06:18:07PM +0000, gannan10@comcast.net wrote: > Hello, > > I get the following error when I tried to setup my raid: > > # mkraid /dev/md0 > handling MD device /dev/md0 > analyzing super-block > disk 0: /dev/hda1, 489951kB, raid superblock at 489856kB > /dev/hda1 is mounted > mkraid: aborted, see the syslog and /proc/mdstat for potential clues. I use mdadm, not mkraid, but it appears the problem is right there: "/dev/hda1 is mounted". Probably if you have a mounted filesystem on /dev/hda1, you cannot add it to the raid array. Once you've created the raid array you can mount /dev/md0 instead of /dev/hda1. -Steve