From: Gordan Bobic Date: Fri, 23 Jan 2004 10:52:20 +0000 Subject: Re: [LARTC] Traffic shaping and IP aliases Message-Id: <200401231052.20954.lartc@bobich.net> List-Id: References: <09d901c3e191$86e66720$6e69690a@RIMAS> In-Reply-To: <09d901c3e191$86e66720$6e69690a@RIMAS> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Friday 23 Jan 2004 09:15, Remus wrote: > Hi folks, > > > I have the traffic shaping (HTB and IMQ) on my eth0 (of course no > problems with it). And now I would like add some extra IPs on it ( > ifconfig eth0:0 xxx.xxx.xxx.xxx and ifconfig eth0:1 xxx.xxx.xxx.xxx). > > So do I have to set up a new tc rools ( tc qdisc add dev eth0:0 root > handle 1: htb default 20 r2q 5 ...) for the eth0:0 and eth0:1 or can > still be only tc rules for the eth0? I've been wondering about the same thing recently. :-) As far as I have managed to find, the only way to do this is to set up dummy devices pointed at the real interface, and shape those instead. I haven't had a chance to try it yet, though... Gordan _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/