From: Jin Suh Subject: Re: [2.4.25] scsi29160 card-aic7xxx, HP Ultrium 230 tape read/write failure Date: Tue, 24 Feb 2004 11:46:28 -0800 (PST) Sender: linux-scsi-owner@vger.kernel.org Message-ID: <20040224194628.46548.qmail@web41211.mail.yahoo.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from web41211.mail.yahoo.com ([66.218.93.44]:20593 "HELO web41211.mail.yahoo.com") by vger.kernel.org with SMTP id S262413AbUBXTq3 (ORCPT ); Tue, 24 Feb 2004 14:46:29 -0500 In-Reply-To: List-Id: linux-scsi@vger.kernel.org To: Marcelo Tosatti , "Justin T. Gibbs" Cc: linux-scsi@vger.kernel.org It appears to be my mistake. At first, I doubt my terminator but I had it on the back of the drive. I fixed it again and switched the scsi cable. It worked OK. Sorry for the interruptions. Now, I have another problem. I am still using the 2.4.25 kernel with HP Ultrium 230 scsi tape drive. Could you take a look at the following: st0: Error with sense data: Current st09:00: sns = 70 5 ASC=53 ASCQ= 2 Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0e 0x00 0x00 0x00 0x00 0x53 0x02 0x00 0x00 0x1c 0x01 0x00 0x00 0x00 0x00 scsi0: Someone reset channel A I didn't touch any cable or drive. I got this message. I tested my tape drive and it worked fine. Do you have any idea what is going on? Thanks, Jin --- Marcelo Tosatti wrote: > > > On Tue, 24 Feb 2004, Jin Suh wrote: > > > Hello, > > > > I recently upgraded my kernel to 2.4.25. I have a strange error using > 2.4.25 > > with Ultrium 230 tape drive. I wrote 4gb data unto the tape and read back > to > > verify md5sum value. It died when it read around 1.3gb data from tape > saying > > following: > > > > (scsi0:A:3:0): parity error detected in Data-in phase. SEQADDR(0x84) > > SCSIRATE(0x98) > > (scsi0:A:3:0): Unexpected busfree in Message-out phase > > SEQADDR == 0x16b > > st0: Error 70000 (sugg. bt 0x0, driver bt 0x0, host bt 0x7). > > st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1). > > st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1). > > st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1). > > st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1). > > st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1). > > st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1). > > st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1). > > st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1). > > st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1). > > st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1). > > st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1). > > ........ > > > > When I tried to read it again using: > > dd if=/dev/st0 bs=1024 conv=noerror,sync | md5sum > > > > I got the following: > > st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1). > > dd: opening '/dev/st0': Input/Output error > > > > I tested the same thing unto the HP Exabyte and HP SuperStore DAT24. Both > > worked without problems. But it happened on the HP Ultrium 230 tape drive. > > Everything used to work fine with 2.4.20 kernel before. Is there any patch > for > > 2.4.25? Do you have any idea? > > Hi Jin, > > CCing linux-scsi to get more input. > > I dont have much clues unfortunately -- reading the SCSI error messages it > looks like a parity error. > > Can you try 2.4.20 again? Find out where this problem started. > > It might be a physical drive problem too which was not failing when you > ran 2.4.20. __________________________________ Do you Yahoo!? Yahoo! Mail SpamGuard - Read only the mail you want. http://antispam.yahoo.com/tools