From: Peter Subject: Re: Gnumeric won't open Date: Sat, 20 Mar 2004 16:18:41 +0800 Sender: linux-newbie-owner@vger.kernel.org Message-ID: <20040320081843.0BEE81D88A@heisspf> References: <200403191616.52655.pa3gcu@zeelandnet.nl> Mime-Version: 1.0 Return-path: In-Reply-To: Your message of "Fri, 19 Mar 2004 16:16:52 +0100." <200403191616.52655.pa3gcu@zeelandnet.nl> List-Id: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: pa3gcu@zeelandnet.nl Cc: linux-newbie@vger.kernel.org Peter said: > Is there any test to find out what is going on while gnumeric tries to > open? pa3gcu@zeelandnet.nl said: > You can use the program 'strace' to see whats happening These are the output lines of strace before it goes apparently into an eternal loop. read(17, "order hosts, bind\nmulti on\n", 4096) = 27 read(17, "", 4096) = 0 close(17) = 0 munmap(0x4002a000, 4096) = 0 open("/etc/hosts", O_RDONLY) = 17 fcntl64(17, F_GETFD) = 0 fcntl64(17, F_SETFD, FD_CLOEXEC) = 0 fstat64(17, {st_mode=S_IFREG|0644, st_size=614, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = read(17, "#\n# hosts\t\tThis file describes a"..., 4096) = 614 read(17, "", 4096) = 0 close(17) = 0 munmap(0x4002a000, 4096) = 0 time(NULL) = 1079742513 socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 17 fcntl64(17, F_SETFD, FD_CLOEXEC) = 0 setsockopt(17, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 setsockopt(17, SOL_TCP, TCP_NODELAY, [1], 4) = 0 connect(17, {sa_family=AF_INET, sin_port=htons(631), sin_addr=inet_addr("127.0. access("/usr/share/locale/C_/cups_C_", F_OK) = -1 ENOENT (No such file or direc access("/usr/share/locale/C/cups_C", F_OK) = 0 send(17, "POST / HTTP/1.1\r\n", 17, 0) = 17 send(17, "Content-Length: 137\r\n", 21, 0) = 21 send(17, "Content-Type: application/ipp\r\n", 31, 0) = -1 EPIPE (Broken pipe) --- SIGPIPE (Broken pipe) @ 0 (0) --- send(17, "Content-Type: application/ipp\r\n", 31, 0) = -1 EPIPE (Broken pipe) --- SIGPIPE (Broken pipe) @ 0 (0) --- close(17) = 0 1) socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 17 2) fcntl64(17, F_SETFD, FD_CLOEXEC) = 0 3) setsockopt(17, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 4) setsockopt(17, SOL_TCP, TCP_NODELAY, [1], 4) = 0 5) connect(17, {sa_family=AF_INET,sin_port=htons(631),sin_addr=inet_addr("127.0 . 6) send(17, "POST / HTTP/1.1\r\n", 17, 0) = 17 7) send(17, "Content-Length: 137\r\n", 21, 0) = 21 8) send(17, "Content-Type: application/ipp\r\n", 31, 0) = -1 EPIPE (Broken pipe) 9) --- SIGPIPE (Broken pipe) @ 0 (0) --- 10) send(17, "Content-Type: application/ipp\r\n", 31, 0) = -1 EPIPE (Broken pipe) 11) --- SIGPIPE (Broken pipe) @ 0 (0) --- 12) close(17) The lines which I numbered 1 to 12 is the loop ad indefinitum which keeps the CPU busy and shows in my program 'stipchart' as Load and Busy. Top does not show anything special, memory and swap remain constant, just the CPU being busy until I do a ^c. The mind bugling number of 45 odd libraries needed by gnumeric do not show any overlap or mismatch. When I un-installed gnumeric I saw that a lot of libraries were being deleted and put back with the re-installation. The only program I installed lately is ActiveTcl which has its own set of libraries. I just looked at my old favorite spreadsheet QuattroPro where for less then 5Mb one has a program with graphics unmatched by Excel and any of its copies in Linux and macros so easy to apply, plus plus plus. Why was Excel copied and not QuattroPro? Unfortunately I cannot open it with dosemu out of Linux. Now can anyone make sense out of the lines created with strace gnumeric to get that program back on stream? Thanks & regards -- Peter - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs