From: james jones Date: Tue, 23 Mar 2004 12:59:06 +0000 Subject: [LARTC] RE: How to limit the Upload speed for an specific IP? Message-Id: <20040323125906.50572.qmail@web60002.mail.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Message: 1 This is how I am marking and limiting both download and upload speeds for IP ranges. Maybe you can get some ideas from this: http://www.geocities.com/jame_sj/ Hello, I want to limit the upload speed for the eth0 Interface for an specific IP. I used the following script, but its only limits the DOWNLOAD speed.But i want to limit both! DEV='eth0' tc qdisc add dev $DEV root handle 1: cbq avpkt 1000 bandwidth 768kbit tc class add dev $DEV parent 1: classid 1:1 cbq rate 100kbit allot 1500 prio 5 bounded isolated tc filter add dev $DEV parent 1: protocol ip prio 16 u32 match ip dst 192.168.0.2 flowid 1:1 Greetz _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/