From: Wolfgang Denk Date: Sun, 28 Mar 2004 17:57:50 +0200 Subject: [U-Boot-Users] Re: EEPROM updation for the MAC address In-Reply-To: Your message of "Sun, 28 Mar 2004 19:17:46 +0530." <004101c414cb$413426f0$af00a8c0@tidelpark.isofttechindia.com> Message-ID: <20040328155755.44946C109F@atlas.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de In message <004101c414cb$413426f0$af00a8c0@tidelpark.isofttechindia.com> you wrote: > > u-boot is not accepting me to change the ethernet address. Is there any > specific reasons for it. This is done so intentionally. Read the documentation: http://www.denx.de/twiki/bin/view/DULG/UBootEnvVariables There are variables (MAC address, serial number, etc.) which are supposed to be set once by the manufacturer of the board, and which do not need to be changed after that, and/or where the end user should not be able to change them. This is what you see. > Is there any way to change the MAC address in my EEPROM? Yes, of course. Everything is possible in software. And BTW: please NEVER send non-administrative messages to the u-boot-users-request at lists.sourceforge.net address; the mailing list address is u-boot-users at lists.sourceforge.net Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Pain is a thing of the mind. The mind can be controlled. -- Spock, "Operation -- Annihilate!" stardate 3287.2