From: Stef Coene Date: Sat, 03 Apr 2004 13:59:26 +0000 Subject: Re: [LARTC] Few question on HTB Message-Id: <200404031559.26370.stef.coene@docum.org> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org On Saturday 03 April 2004 15:34, Sandeep Agarwal wrote: > Hello Sir, > I have linux box with 4 NIC. 256kbps is reaching upto eth0 after router. > Now want to split the this bandwidh within remaining NIC's. I have gone > through the lartc.org & prepared the earlier mentioned HTB script files. > The name of files are=20 These files are useless for us. You use htb.init to configure the router=20 setup and this mailinglist is for general qos discussions, not for htb.init= =20 implementation details. > I have already mailed the scripts to you on your ID. If you suggest, I can > mail them again to you off the list. This is what I understand from the > instruction of htb.init. Is these are correct for the mentioned purpose? = Or > should I have to prepare some more / other types of files. You really should read some more documentation about this. - you can only shape outgoing traffic - what means prio - rate - burst - ceil - natting + filtering on ip address can be a problem Stef -- stef.coene@docum.org =A0"Using Linux as bandwidth manager" =A0 =A0 =A0http://www.docum.org/ =A0 =A0 =A0#lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/