From: Jason Boxman Date: Fri, 09 Apr 2004 18:29:26 +0000 Subject: Re: [LARTC] tcsim (was: Can I give more bandwidth to a specific URL) Message-Id: <200404091429.26210.jasonb@edseek.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Tuesday 06 April 2004 17:29, Jason Boxman wrote: > On Tuesday 06 April 2004 05:17, Martin A. Brown wrote: > > > > If you are just starting out with traffic control under Linux, I strongly > > recommend learning and using tcng from the beginning. The control > > language offered by tcng (although technical) is much more like English > > or human language than the more arcane tc syntax. Here are some starting > > points for learning about tcng [4] [5]. (Lest there be any doubt, you > > will need tc, from iproute2, as well as tcng.) > > Speaking of TCNG, I read through the various guides and I still can't > figure out how I am supposed to be using tcsim. While I can get it to > output information and graph it, the output does not mean anything to me. > I was expecting output similar to what appears on the HTB author's Web > site, since that means a lot more to me. > > What is tcsim telling me exactly? Does no one use tcsim? > Thanks! > > > > > -Martin > > > > [0] http://lartc.org/ > > [1] http://www.docum.org/ > > [2] http://www.docum.org/stef.coene/qos/faq/cache/ > > [3] http://tldp.org/HOWTO/Traffic-Control-HOWTO/ > > [4] http://tldp.org/HOWTO/Traffic-Control-tcng-HTB-HOWTO/ > > [5] http://linux-ip.net/gl/tcng/ > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/