From: aurelien@aurel32.net (Aurelien Jarno) Date: Thu, 19 May 2005 06:24:53 +0000 Subject: [PATCH] sensors.conf for an Abit BP6 motherboard Message-Id: <20040416192633.GC31563@pc.aurel32.private> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hi all ! I have attached a patch that adds comments to sensors.conf to explain how to configure it for an Abit BP6 motherboard. Please feel free to apply it or not. Cheers, Aurelien -- .''`. Aurelien Jarno GPG: 1024D/F1BCDB73 : :' : Debian GNU/Linux developer | Electrical Engineering Student `. `' aurel32@debian.org | aurelien@aurel32.net `- people.debian.org/~aurel32 | www.aurel32.net -------------- next part -------------- diff -urN lm_sensors2.orig/etc/sensors.conf.eg lm_sensors2/etc/sensors.conf.eg --- lm_sensors2.orig/etc/sensors.conf.eg 2004-04-16 20:32:04.000000000 +0200 +++ lm_sensors2/etc/sensors.conf.eg 2004-04-16 20:33:19.000000000 +0200 @@ -404,6 +404,12 @@ label in7 "V5SB" label in8 "VBat" +# Abit BP6 motherboard has a few differences. VCore1 and VCore2 are the core +# voltages of the two processors. Vtt is memory bus termination resistors +# voltage. +# label in1 "Vtt" +# label in8 "VCore2" + compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1) compute in4 ((28/10)+1)*@ , @/((28/10)+1) compute in5 (5.14 * @) - 14.91 , (@ + 14.91) / 5.14