From: Wolfgang Denk Date: Sun, 18 Apr 2004 17:10:53 +0200 Subject: [U-Boot-Users] Need help booting linux on 8265 eval board In-Reply-To: Your message of "Sun, 18 Apr 2004 22:56:53 +0800." Message-ID: <20040418151058.5AA27C109F@atlas.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de In message you wrote: > > I have problem booting linux on 8265 eval board. when I boot the linux > kernel, the board be dead. the registers look like > to be some default values(use powertap pro). I try u-boot1.1, ppcboot1.1.5; Be careful. User the default values as defined in U-Boot and Linux, and DON'T change these unless you know EXACTLY what you are doing. > vim Makefile, arch=ppc CROSS_COMPILE=ppc_82xx > vim arch/ppc/platforms/ads826x.h, IMAP_ADDR=0x04700000 BCSR=0x04500000 This cannot work. Please leave the mapping as defined by U-Boot and Linux. > > then the board is dead and the LED(FCC link) coruscate . > (I have modified clock calculations for this board. it's the reason?) > any ideas? thanks a lot! You seem to modify a lot of stuff without konwing exactly why - don;t do this. The default values are there for a reason - they are known to work. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de "There are three principal ways to lose money: wine, women, and engi- neers. While the first two are more pleasant, the third is by far the more certain." - Baron Rothschild, ca. 1800