From: Stef Coene Date: Sun, 09 May 2004 08:42:26 +0000 Subject: Re: [LARTC] MARK target question Message-Id: <200405091042.26944.stef.coene@docum.org> List-Id: References: <20040509000035.GA15048@rabbit.us> In-Reply-To: <20040509000035.GA15048@rabbit.us> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org On Sunday 09 May 2004 02:00, Peter Rabbitson wrote: > This is more of a NF question but it is tightly related to LARTC as well. > In the following example: > > -t mangle -A PREROUTING -i eth0 -j MARK 0x1 > .... > -t mangle -A INPUT -i eth0 -j MARK 0x2 > > Since MARK is a non-terminatring target, what would be the resulting mark > on a packet comming from the outside and destined for a local process? INPUT is after PREROUTING, so 0x2. See=20 http://www.docum.org/stef.coene/qos/kptd/ Stef --=20 stef.coene@docum.org =A0"Using Linux as bandwidth manager" =A0 =A0 =A0http://www.docum.org/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/