From: Carles Xavier Munyoz =?iso-8859-15?q?Bald=F3?= Date: Thu, 13 May 2004 14:05:40 +0000 Subject: [LARTC] Bandwith especification. Message-Id: <200405131605.40085.carles@unlimitedmail.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Hi, If I have a DSL router with 300kpbs upload bandwith: Linux(eth0) ---(100Mbps)---> DSL ---(300kbps)---> INTERNET Which is the recomended value I must set in my QoS setup for the maximum=20 outbound bandwith of my ethernet interface ? The max of 300kbps or something less like 290kbps ? Especify less than the maximum available bandwith is advisable to ensure th= at=20 the QoS algoritms goes fine, isn't it ? Greetings. --- Carles Xavier Munyoz Bald=F3 carles@unlimitedmail.org http://www.unlimitedmail.net/ --- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/