From: Stef Coene Date: Thu, 13 May 2004 17:18:21 +0000 Subject: Re: [LARTC] Bandwith especification. Message-Id: <200405131918.21410.stef.coene@docum.org> List-Id: References: <200405131605.40085.carles@unlimitedmail.org> In-Reply-To: <200405131605.40085.carles@unlimitedmail.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org On Thursday 13 May 2004 16:05, Carles Xavier Munyoz Bald=F3 wrote: > Hi, > If I have a DSL router with 300kpbs upload bandwith: > Linux(eth0) ---(100Mbps)---> DSL ---(300kbps)---> INTERNET > > Which is the recomended value I must set in my QoS setup for the maximum > outbound bandwith of my ethernet interface ? > The max of 300kbps or something less like 290kbps ? > > Especify less than the maximum available bandwith is advisable to ensure > that the QoS algoritms goes fine, isn't it ? Yes. Staf --=20 stef.coene@docum.org =A0"Using Linux as bandwidth manager" =A0 =A0 =A0http://www.docum.org/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/