From: Jason Boxman Date: Fri, 14 May 2004 17:10:23 +0000 Subject: Re: [LARTC] HTB MPU Message-Id: <200405141310.23982.jasonb@edseek.com> List-Id: References: <40A37E1B.8060604@dsl.pipex.com> In-Reply-To: <40A37E1B.8060604@dsl.pipex.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Friday 14 May 2004 05:55, Andy Furniss wrote: > If you can get a cell count from your modem you can work it out with > ping. I don't know what your pppoe is. I can probably get my USB Stringray out of the closet and hook it up. I think the Windows diagnostic utility for it actually included some stuff about frames and cell sizes. The browser based diagnostics on my Westell don't include anything interesting. > Your upstream worst case depends on your bitrate and your MTU. If it's > 128k you add about 90ms, 256k 45ms for 1500b packets. What's yours? My upstream is supposedly 256Kbps. I am running the ADSL modem in pass-through mode, so it gives my Linux router the live IP. When I did PPPoE internally I had an MTU of 1492 and used the RP PPPoE daemon. > Andy. > -- Jason Boxman Perl Programmer / *NIX Systems Administrator Shimberg Center for Affordable Housing | University of Florida http://edseek.com/ - Linux and FOSS stuff _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/