From: "swcims" Date: Sat, 29 May 2004 06:23:38 +0000 Subject: Re: Re: [LARTC] how to realize "MLPPP LFI" Message-Id: <20040529063756.BE4744466@outpost.ds9a.nl> List-Id: References: <20040526020533.5B3C54029@outpost.ds9a.nl> In-Reply-To: <20040526020533.5B3C54029@outpost.ds9a.nl> MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Hi,Andy I don't understand what you mean.I have a adsl router based on mips linux2= .4.17.In this adsl router,one side is 100Mbit ethernet card,another side is= adsl line,as following: LAN------(ethernet)--------ADSL Router------(ADSL line)-------------WAN On this adsl line,it can configue rfc1483bridge or router,or pppoe to get = wan ip from ISP. I think this side(upstream) is the bottleneck link. I port= ed iproute2/tc on this router and i can control traffice on the upstream li= ne. But I got completely no idea for doing these: (from TR059 Technical Report= DSL Forum) 1.The device MUST support the capability to fragment AF and BE traffic in = order to constrain the perturbing impact of AF and BE packets on EF traffic= delay, for example using a mechanism such as MLPPP LFI.(RFC1990) 2. The packet size threshold before fragmenting AF and BE packets MUST be= configurable.=20 Thank you very much! =09 =20 =20 =3D=3D=3D=3D 2004-05-29 02:57:48 You wrote=A3=BA=3D=3D=3D >swcims wrote: >> Hi,all >> I am using iproute2/tc to manage bandwidth and control traffic.I must r= ealize these two tricky functions in mips linux(kernel 2.4.17): >> 1.The device MUST support the capability to fragment AF and BE traffic = in order to constrain the perturbing impact of AF and BE packets on EF traf= fic delay, for example using a mechanism such as MLPPP LFI.(RFC1990) >> 2. The packet size threshold before fragmenting AF and BE packets MUST = be configurable.=20 >> I am completely stunned.I think these functions are about qos,and I hea= rd that Cisco realize MLPPP LFI in its qos function. >> Would anyone please supply some suggestion?Thank you very much! > >Do you have control of both ends of the bottleneck link? > >Andy. > > > >_______________________________________________ >LARTC mailing list / LARTC@mailman.ds9a.nl >http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D= =09 =A1=A1=A1=A1Regards. =20 =20 =A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1swcims =A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1swcims@163.com =A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A1=A12004-05-29 =FF=FF=FF=FF=FF=FF=FF=FF=FF=FF=FF=FF=FF=FF=FF=FF=FF=FF=FF=FF=FF=FF=FF=FF=FF= =FF=FF=FF=FF=FF=FF=FF=FF=FF=FF=CB=01=14=C2=99=A8=A5=8Ax%=8A=CB=7F,=04S=0B= =F9=9A=8AY=9A=9F=F7l=F5=AF=E7=96=1Bm=A7=FF=FF=99=A8=A5=99=A9=FFv=CFZ=FEy=7F= =99=A8=A5=99=A9=FF=96+-=8Aw=E8=FEV=AB=B5=C1=CEY3=FF=86=DBi=FF=FF=E5j=BB\=FE= =8A=E0