From: Christoph Hellwig Subject: [PATCH 1/6] add ISP1040 register definitions Date: Sun, 6 Jun 2004 14:57:28 +0200 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <20040606125728.GB31063@lst.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from verein.lst.de ([212.34.189.10]:25802 "EHLO mail.lst.de") by vger.kernel.org with ESMTP id S263544AbUFFM5c (ORCPT ); Sun, 6 Jun 2004 08:57:32 -0400 Content-Disposition: inline List-Id: linux-scsi@vger.kernel.org To: jes@trained-monkey.org Cc: linux-scsi@vger.kernel.org The old 1020/1040 has some registers where the newer controlers only have reserved space, add that to qla1280.h diff -Nru a/drivers/scsi/qla1280.h b/drivers/scsi/qla1280.h --- a/drivers/scsi/qla1280.h 2004-06-06 14:45:26 +02:00 +++ b/drivers/scsi/qla1280.h 2004-06-06 14:45:26 +02:00 @@ -126,7 +126,20 @@ uint16_t id_l; /* ID low */ uint16_t id_h; /* ID high */ uint16_t cfg_0; /* Configuration 0 */ +#define ISP_CFG0_HWMSK 0x000f /* Hardware revision mask */ +#define ISP_CFG0_1020 BIT_0 /* ISP1020 */ +#define ISP_CFG0_1020A BIT_1 /* ISP1020A */ +#define ISP_CFG0_1040 BIT_2 /* ISP1040 */ +#define ISP_CFG0_1040A BIT_3 /* ISP1040A */ +#define ISP_CFG0_1040B BIT_4 /* ISP1040B */ +#define ISP_CFG0_1040C BIT_5 /* ISP1040C */ uint16_t cfg_1; /* Configuration 1 */ +#define ISP_CFG1_F128 BIT_6 /* 128-byte FIFO threshold */ +#define ISP_CFG1_F64 BIT_4|BIT_5 /* 128-byte FIFO threshold */ +#define ISP_CFG1_F32 BIT_5 /* 128-byte FIFO threshold */ +#define ISP_CFG1_F16 BIT_4 /* 128-byte FIFO threshold */ +#define ISP_CFG1_BENAB BIT_2 /* Global Bus burst enable */ +#define ISP_CFG1_SXP BIT_0 /* SXP register select */ uint16_t ictrl; /* Interface control */ #define ISP_RESET BIT_0 /* ISP soft reset */ #define ISP_EN_INT BIT_1 /* ISP enable interrupts. */ @@ -147,7 +160,42 @@ uint16_t flash_data; /* Flash BIOS data */ uint16_t flash_address; /* Flash BIOS address */ - uint16_t unused_1[0x2e]; /* 0x14-0x6f Gap */ + uint16_t unused_1[0x06]; + + /* cdma_* and ddma_* are 1040 only */ + uint16_t cdma_cfg; +#define CDMA_CONF_SENAB BIT_3 /* SXP to DMA Data enable */ +#define CDMA_CONF_RIRQ BIT_2 /* RISC interrupt enable */ +#define CDMA_CONF_BENAB BIT_1 /* Bus burst enable */ +#define CDMA_CONF_DIR BIT_0 /* DMA direction (0=fifo->host 1=host->fifo) */ + uint16_t cdma_ctrl; + uint16_t cdma_status; + uint16_t cdma_fifo_status; + uint16_t cdma_count; + uint16_t cdma_reserved; + uint16_t cdma_address_count_0; + uint16_t cdma_address_count_1; + uint16_t cdma_address_count_2; + uint16_t cdma_address_count_3; + + uint16_t unused_2[0x06]; + + uint16_t ddma_cfg; +#define DDMA_CONF_SENAB BIT_3 /* SXP to DMA Data enable */ +#define DDMA_CONF_RIRQ BIT_2 /* RISC interrupt enable */ +#define DDMA_CONF_BENAB BIT_1 /* Bus burst enable */ +#define DDMA_CONF_DIR BIT_0 /* DMA direction (0=fifo->host 1=host->fifo) */ + uint16_t ddma_ctrl; + uint16_t ddma_status; + uint16_t ddma_fifo_status; + uint16_t ddma_xfer_count_low; + uint16_t ddma_xfer_count_high; + uint16_t ddma_addr_count_0; + uint16_t ddma_addr_count_1; + uint16_t ddma_addr_count_2; + uint16_t ddma_addr_count_3; + + uint16_t unused_3[0x0e]; uint16_t mailbox0; /* Mailbox 0 */ uint16_t mailbox1; /* Mailbox 1 */ @@ -158,18 +206,18 @@ uint16_t mailbox6; /* Mailbox 6 */ uint16_t mailbox7; /* Mailbox 7 */ - uint16_t unused_2[0x20];/* 0x80-0xbf Gap */ + uint16_t unused_4[0x20];/* 0x80-0xbf Gap */ uint16_t host_cmd; /* Host command and control */ #define HOST_INT BIT_7 /* host interrupt bit */ #define BIOS_ENABLE BIT_0 - uint16_t unused_6[0x5]; /* 0xc2-0xcb Gap */ + uint16_t unused_5[0x5]; /* 0xc2-0xcb Gap */ uint16_t gpio_data; uint16_t gpio_enable; - uint16_t unused_7[0x11]; /* d0-f0 */ + uint16_t unused_6[0x11]; /* d0-f0 */ uint16_t scsiControlPins; /* f2 */ };