From: =?gb2312?q?Roc=20Wu?= Subject: Re: An driver error when I using aplay! Date: Mon, 7 Jun 2004 11:04:08 +0800 (CST) Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20040607030408.4273.qmail@web15210.mail.bjs.yahoo.com> References: <20040604091303.19549.qmail@web15207.mail.bjs.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=gb2312 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20040604091303.19549.qmail@web15207.mail.bjs.yahoo.com> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Hi folks: I don't want to post my question again. But there is not any response about my question. Maybe I did some thing wrong about asking question, please let me know. I will change my method, Thanks a lot. Please give me some help. Best Regards --- Roc Wu 的正文:> Hi folks: > > I compiled the alsa-utils. Then I run the aplay on > my > board like this: > > # ./aplay -t wav -f U8 -r 22050 alarm.wav > Playing WAVE 'alarm.wav' : Unsigned 8 bit, Rate > 22050 > Hz, Mono > ALSA lib > pcm_plug.c:727:(snd_pcm_plug_hw_refine_schange) > Unable > to find an usable access for 'default' > aplay: set_params:832: Sample format non available > > And the kernel driver will dump out the message as > below: > Badness in aaci_pcm_close at sound/arm/aaci.c:404 > [] (aaci_pcm_close+0x0/0x90) from > [] (snd_pcm_release_file+0 > x58/0x8c) > r5 = C03852BC r4 = C03CDC88 > [] (snd_pcm_release_file+0x0/0x8c) from > [] (snd_pcm_release+ > 0x8c/0x110) > r7 = C03852BC r6 = C7BF8820 r5 = C0388A00 r4 = > C0388B18 > [] (snd_pcm_release+0x0/0x110) from > [] (__fput+0x58/0x138) > r7 = C7DEB1E8 r6 = C7FF5260 r5 = C7AFD7FC r4 = > C7BF8820 > [] (__fput+0x0/0x138) from [] > (filp_close+0x84/0x90) > r7 = 00000001 r6 = C7FEAA00 r5 = 00000000 r4 = > C7BF8820 > [] (filp_close+0x0/0x90) from [] > (put_files_struct+0x8c/0xe8 > ) > r6 = 00000004 r5 = 00000001 r4 = C7FEAA00 > [] (put_files_struct+0x0/0xe8) from > [] (do_exit+0x188/0x398) > r7 = 00000100 r6 = C00169C0 r5 = C0390360 r4 = > C00169A0 > [] (do_exit+0x0/0x398) from [] > (next_thread+0x0/0x28) > r7 = 00000001 r6 = 00000001 r5 = 402DDE10 r4 = > 402DDE10 > [] (sys_exit+0x0/0x18) from [] > (ret_fast_syscall+0x0/0x2c) > > Please give me some hints about the problem. > > Thanks a lot > Best Regards > > > > _________________________________________________________ > Do You Yahoo!? > 嫌邮箱太小?雅虎电邮自助扩容! > http://cn.rd.yahoo.com/mail_cn/tag/10m/*http://cn.mail.yahoo.com/event/10m.html > > > ------------------------------------------------------- > This SF.Net email is sponsored by the new > InstallShield X. > From Windows to Linux, servers to mobile, > InstallShield X is the one > installation-authoring solution that does it all. > Learn more and > evaluate today! > http://www.installshield.com/Dev2Dev/0504 > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/alsa-devel _________________________________________________________ Do You Yahoo!? 嫌邮箱太小?雅虎电邮自助扩容! http://cn.rd.yahoo.com/mail_cn/tag/10m/*http://cn.mail.yahoo.com/event/10m.html ------------------------------------------------------- This SF.Net email is sponsored by the new InstallShield X. >From Windows to Linux, servers to mobile, InstallShield X is the one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504