From: Stef Coene Date: Wed, 23 Jun 2004 13:51:02 +0000 Subject: Re: [LARTC] HTB: 3. Sharing hierarchy Message-Id: <200406231551.02467.stef.coene@docum.org> List-Id: References: <20040622041910.80058.qmail@web11908.mail.yahoo.com> In-Reply-To: <20040622041910.80058.qmail@web11908.mail.yahoo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org On Tuesday 22 June 2004 06:19, Mike Mestnik wrote: > On http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm... > There is a nice explanation on how/why to setup a hierarchy with HTB. > Howerver what is missing is how to setup finters for this case? For more information and examples: http://docum.org/ > I had this working when I was using a seperat qdisc for each ?layer?, > making each HTB only one level deep. Described in the attached > qdisc.sh.GOOD. Not such a good idea. > Described in the attached qdisc.sh is my current script, is my new config > script. > > Described in the attached qdisc-undo.sh is the output of my ifup-mkundo.sh > script, a reversed(read from the bottom up) list of del cmds for the given > up script. The command tc qdisc del dev eth1 root is enough to delete everything. Stef --=20 stef.coene@docum.org =A0"Using Linux as bandwidth manager" =A0 =A0 =A0http://www.docum.org/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/