From: Wolfgang Denk Date: Tue, 13 Jul 2004 21:28:08 +0200 Subject: [U-Boot-Users] Debugging U-Boot Under DDD In-Reply-To: Your message of "Tue, 13 Jul 2004 10:57:34 PDT." <20040713175734.30201.qmail@web50506.mail.yahoo.com> Message-ID: <20040713192813.62607C109F@atlas.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de In message <20040713175734.30201.qmail@web50506.mail.yahoo.com> you wrote: > I tried loading elf file, this is what I get > > BDI>erase 0x02000000 chip > Erasing flash at 0x02000000 > Erasing flash passed > BDI>prog 0x02000000 u-boot elf > Programming u-boot , please wait .... > - File offset 0x00000078 to address 0x04000000 size 131408 > # Programming flash memory failed at 0x04000040 You misunderstood. I was talking about loading the ELF file in GDB, not about programming it to flash using the BDI's telnet interface. These are completely different things. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Always leave room to add an explanation if it doesn't work out.