From: bugtrack@alsa-project.org Subject: [ALSA - driver 0000238]: spdif output fails with atiixp Date: Fri, 27 Aug 2004 13:50:36 +0200 (CEST) Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20040827115036.918322C008@server.perex-int.cz> Content-Type: text/plain; charset=iso-8859-1 Return-path: Received: from mail.perex.cz (gate.perex.cz [82.113.61.162]) by alsa.alsa-project.org (ALSA's E-mail Delivery System) with ESMTP id 051B01F0 for ; Fri, 27 Aug 2004 13:50:36 +0200 (MEST) Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org A BUGNOTE has been added to this bug. ====================================================================== https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000238 ====================================================================== Reported By: pkashou Assigned To: tiwai ====================================================================== Project: ALSA - driver Bug ID: 238 Category: PCI - atiixp Reproducibility: always Severity: major Priority: normal Status: assigned Distribution: Gentoo Kernel Version: gentoo-dev-sources 2.6.5 (running cvs alsa in kernel) ====================================================================== Date Submitted: 04-27-2004 03:54 CEST Last Modified: 08-27-2004 13:50 CEST ====================================================================== Summary: spdif output fails with atiixp Description: When running ALSA 1.0.4rc2 included in 2.6.5 kernel, spdif output was intermittant, almost complete static. Updating kernel alsa to latest cvs caused spdif output to stop completely. dmesg reports no errors. Everything appears configured, but there is zero output on the spdif line - no light through wire. >aplay -l **** List of PLAYBACK Hardware Devices **** card 0: IXP [ATI IXP], device 0: ATI IXP AC97 [ATI IXP AC97] Subdevices: 1/1 Subdevice https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000000: subdevice https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000000 card 0: IXP [ATI IXP], device 1: ATI IXP IEC958 [ATI IXP IEC958] Subdevices: 1/1 Subdevice https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000000: subdevice https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000000 >cat /proc/asound/devices 1: : sequencer 0: [0- 0]: ctl 17: [0- 1]: digital audio playback 16: [0- 0]: digital audio playback 24: [0- 0]: digital audio capture 33: : timer >aplay -D hw:0,1 .wav returns: Playing WAVE 'audiodump.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo Warning: rate is not accurate (requested = 44100Hz, got = 48000Hz) please, try the plug plugin (-Dplug:hw:0,1) Analog output is working correctly. More info and logs on request. ====================================================================== ---------------------------------------------------------------------- tiwai - 04-27-2004 12:29 CEST ---------------------------------------------------------------------- did you set correct IEC958 status bits? you need either to pass parameters of iec958 plugin or set statically via iecset program. also, show the contents of AC97 codec and register dump in /proc/asound/card0/codec97#0/*. ---------------------------------------------------------------------- pkashou - 04-27-2004 13:41 CEST ---------------------------------------------------------------------- I have not set the bits manually, but they are set. >iecset -x AES0=0x00,AES1=0x82,AES2=0x00,AES3=0x02 >iecset -Dhw:0 Mode: consumer Data: audio Rate: 48000 Hz Copyright: protected Emphasis: none Category: PCM coder Original: original Clock: 1000 ppm >cat /proc/asound/card0/codec97#0/* 0-0/0: Realtek ALC650 rev 3 Capabilities : DAC resolution : 20-bit ADC resolution : 18-bit 3D enhancement : Realtek 3D Stereo Enhancement Current setup Mic gain : +0dB [+0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Extended ID : codec=0 rev=1 LDAC SDAC CDAC DSA=0 SPDIF DRA VRA Extended status : LDAC SDAC CDAC SPDIF=3/4 SPDIF VRA PCM front DAC : 44100Hz PCM Surr DAC : 44100Hz PCM LFE DAC : 44100Hz PCM ADC : 48000Hz SPDIF Control : Consumer PCM Category=0x2 Generation=1 Rate=48kHz SPDIF In Status : Not Locked 0:00 = 5980 0:02 = 0808 0:04 = 0000 0:06 = 0008 0:08 = 0000 0:0a = 8008 0:0c = 801f 0:0e = 801f 0:10 = 1f1f 0:12 = 9f1f 0:14 = 1f1f 0:16 = 8808 0:18 = 0808 0:1a = 0404 0:1c = 8b0b 0:1e = 0000 0:20 = 0000 0:22 = 0002 0:24 = 0000 0:26 = 800f 0:28 = 05c7 0:2a = 01c5 0:2c = ac44 0:2e = ac44 0:30 = ac44 0:32 = bb80 0:34 = 0000 0:36 = 0808 0:38 = 0808 0:3a = 2824 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0000 0:5e = 0000 0:60 = 0000 0:62 = 8000 0:64 = 0808 0:66 = 0808 0:68 = 0000 0:6a = 1000 0:6c = 0000 0:6e = 0025 0:70 = 0231 0:72 = 00a0 0:74 = 0043 0:76 = 0001 0:78 = 8102 0:7a = 57c3 0:7c = 414c 0:7e = 4720 ---------------------------------------------------------------------- pkashou - 04-28-2004 02:32 CEST ---------------------------------------------------------------------- Uploaded my asound.state in case something strange was going on there. ---------------------------------------------------------------------- tiwai - 04-30-2004 11:34 CEST ---------------------------------------------------------------------- the status seems ok. could you try iec958 PCM name instead of hw:0,1? or, try 'ac3dec -C something.ac3'. ---------------------------------------------------------------------- pkashou - 05-01-2004 01:02 CEST ---------------------------------------------------------------------- Same result, no sound...no light at all with: >ac3dec -C test.ac3 Using PCM device 'plug:iec958:{AES0 0x2 AES1 0x82 AES2 0x0 AES3 0x2}' AC3 Stream 48.0 KHz 448 kbps I did notice that 'AES0' does not have the same value in ac3dec as from 'iecset -x' Could there be a connection? And 'aplay -D iec958 test.wav' did not have light/sound either. edited on: 05-01-04 01:00 edited on: 05-01-04 01:02 ---------------------------------------------------------------------- tiwai - 05-01-2004 10:33 CEST ---------------------------------------------------------------------- to be sure: did you update alsa-lib, too? ---------------------------------------------------------------------- pkashou - 05-01-2004 21:17 CEST ---------------------------------------------------------------------- Well...I had a long, in-depth note about what I did and what happened and the ALSA bug system decided to crash. So..here it is again. Yes I did have alsa-lib CVS installed. I just downgraded my kernel to 1.0.4 and alsa-lib to 1.0.4. After rebuild/restart I now get light and static with "aplay -D hw:0,1 test.wav". ac3dec now actually puts light on the line, but it plays an entire ac3 song in less than a second, so I can't tell what the ouput is (probably not good sound). Here are the new regs and iecset stuff for comparison. >iecset -x AES0=0x00,AES1=0x82,AES2=0x00,AES3=0x00 >iecset -Dhw:0 Mode: consumer Data: audio Rate: 44100 Hz Copyright: protected Emphasis: none Category: PCM coder Original: original Clock: 1000 ppm >cat /proc/asound/card0/codec97#0/* 0-0/0: Realtek ALC650 rev 3 Capabilities : DAC resolution : 20-bit ADC resolution : 18-bit 3D enhancement : Realtek 3D Stereo Enhancement Current setup Mic gain : +0dB [+0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Extended ID : codec=0 rev=1 LDAC SDAC CDAC DSA=0 SPDIF DRA VRA Extended status : LDAC SDAC CDAC SPDIF=3/4 SPDIF VRA PCM front DAC : 48000Hz PCM Surr DAC : 48000Hz PCM LFE DAC : 48000Hz PCM ADC : 48000Hz SPDIF Control : Consumer PCM Category=0x2 Generation=1 Rate=44.1kHz SPDIF In Status : Not Locked 0:00 = 5980 0:02 = 0808 0:04 = 0000 0:06 = 0008 0:08 = 0000 0:0a = 800a 0:0c = 801f 0:0e = 801f 0:10 = 1f1f 0:12 = 9f1f 0:14 = 1f1f 0:16 = 8808 0:18 = 0808 0:1a = 0404 0:1c = 8b0b 0:1e = 0000 0:20 = 0000 0:22 = 0002 0:24 = 0000 0:26 = 000f 0:28 = 05c7 0:2a = 01c5 0:2c = bb80 0:2e = bb80 0:30 = bb80 0:32 = bb80 0:34 = 0000 0:36 = 0808 0:38 = 0808 0:3a = 0824 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0000 0:5e = 0000 0:60 = 0000 0:62 = 8000 0:64 = 0808 0:66 = 0808 0:68 = 0000 0:6a = 0000 0:6c = 0000 0:6e = 0025 0:70 = 0231 0:72 = 00a0 0:74 = 0043 0:76 = 0001 0:78 = 8102 0:7a = 57c3 0:7c = 414c 0:7e = 4720 ---------------------------------------------------------------------- pkashou - 05-24-2004 15:02 CEST ---------------------------------------------------------------------- Any sort of status update available? I saw that there was some experimental code added to CVS, but I have not tested it. Are you waiting to do further testing? Thanks. ---------------------------------------------------------------------- pkashou - 06-12-2004 16:41 CEST ---------------------------------------------------------------------- Just tried out the latest CVS kernel and lib and still no sound or light on iec958. Any ideas as to why only ALSA 1.0.4 works? If I change nothing else on my system but the ALSA version, I get static with 1.0.4 and 1.0.4r2 and no output with later versions. ---------------------------------------------------------------------- tiwai - 06-30-2004 16:32 CEST ---------------------------------------------------------------------- You may try spdif_aclink=1 module option. With this mode, atiixp driver uses the (so-called) direct-SPDIF mode. I got reports that this mode works on some boards. This may not work well with non-audio (AC3) output, though... ---------------------------------------------------------------------- pkashou - 08-27-2004 13:50 CEST ---------------------------------------------------------------------- Apologies for the long delay. What you suggested did not work. I will be rebuilding the machine this weekend and will attempt IEC958 output with alsa 1.0.6 Bug History Date Modified Username Field Change ====================================================================== 04-27-04 03:54 pkashou New Bug 04-27-04 03:54 pkashou Distribution => Gentoo 04-27-04 03:54 pkashou Kernel Version => gentoo-dev-sources 2.6.5 (running cvs alsa in kernel) 04-27-04 12:29 tiwai Bugnote Added: 0000960 04-27-04 13:41 pkashou Bugnote Added: 0000961 04-28-04 02:31 pkashou File Added: asound.state 04-28-04 02:32 pkashou Bugnote Added: 0000968 04-30-04 11:34 tiwai Bugnote Added: 0000979 05-01-04 00:56 pkashou Bugnote Added: 0000985 05-01-04 00:56 pkashou Bugnote Edited: 0000985 05-01-04 01:00 pkashou Bugnote Edited: 0000985 05-01-04 01:02 pkashou Bugnote Edited: 0000985 05-01-04 10:33 tiwai Bugnote Added: 0000993 05-01-04 21:17 pkashou Bugnote Added: 0001001 05-24-04 15:02 pkashou Bugnote Added: 0001185 06-12-04 16:41 pkashou Bugnote Added: 0001301 06-30-04 16:32 tiwai Bugnote Added: 0001356 08-27-04 13:50 pkashou Bugnote Added: 0001642 ====================================================================== ------------------------------------------------------- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285