From: Wolfgang Denk Date: Sun, 12 Sep 2004 18:41:10 +0200 Subject: [U-Boot-Users] ppc405gp cpu problems In-Reply-To: Your message of "Sun, 12 Sep 2004 05:09:18 +0300." <008d01c4986d$8293fb90$030aa8c0@t> Message-ID: <20040912164115.E8EC6C1430@atlas.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de In message <008d01c4986d$8293fb90$030aa8c0@t> you wrote: > > first problem with bootloader: ... > Seems everybody else is executing this code without problems Indeed. Are you sure your CPU can read the flash contents without problems? > Another problem is with MMU on linux. > cpu crashes almost immediately at start. > when linux atempts to initialize MMU How do you know? Are you using a JTAG debugger? Which one/ Does it understand to use virtual addresses, and is it configured correctly for this? > What can cause such behavior? Or these cpu have some defect? I guess you are using an inappropriate and/or misconfigured tool. Additionally, there might be the typical RAM problems you can read about in at least 9 out of 10 postings on tis list. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de 8 Catfish = 1 Octo-puss