From: Russell King Subject: Re: ST16C554 Serial device driver Date: Tue, 21 Sep 2004 13:09:57 +0100 Sender: linux-serial-owner@vger.kernel.org Message-ID: <20040921130957.B16836@flint.arm.linux.org.uk> References: <41500508.9010004@free.fr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from caramon.arm.linux.org.uk ([212.18.232.186]:16137 "EHLO caramon.arm.linux.org.uk") by vger.kernel.org with ESMTP id S267601AbUIUMKB (ORCPT ); Tue, 21 Sep 2004 08:10:01 -0400 Content-Disposition: inline In-Reply-To: <41500508.9010004@free.fr>; from eric.valette@free.fr on Tue, Sep 21, 2004 at 12:40:08PM +0200 List-Id: linux-serial@vger.kernel.org To: Eric Valette Cc: linux-serial@vger.kernel.org On Tue, Sep 21, 2004 at 12:40:08PM +0200, Eric Valette wrote: > Sorry to annoy you with one small question : I'm currently working as a > contractor to port an application from LynxOS to linux 2.6 and I'm > annoyed with the serial driver code. I need to find a driver for a > ST16C554 quad serial ISA board. I've tried to use setserial with the > relevant IO ports and irq but cannot manage to output annything on the > PC 104 board. The kernel 8250 driver is expected to drive this port. What is the result of an autodetect at the correct address? What are the commands you're issuing to tell the kernel where this port is? Do you get any kernel messages, and what are they? -- Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of: 2.6 PCMCIA - http://pcmcia.arm.linux.org.uk/ 2.6 Serial core