Return-Path: Received: from fed1rmmtao08.cox.net (fed1rmmtao08.cox.net [68.230.241.31]) by ozlabs.org (Postfix) with ESMTP id 40C812BDA6 for ; Wed, 22 Sep 2004 01:48:48 +1000 (EST) Date: Tue, 21 Sep 2004 08:48:46 -0700 From: Tom Rini To: Marius Groeger Message-ID: <20040921154846.GQ27914@smtp.west.cox.net> References: <414916BD.9080607@sonartech.com.au> <20040915223624.A25752@home.com> <414946A0.1020306@sonartech.com.au> <20040920173241.GL27914@smtp.west.cox.net> <20040920122312.A8344@home.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: Cc: linuxppc-dev@ozlabs.org Subject: Re: Linux-2.6.9-rc2 kernel build for mvme5100 List-Id: "Linux on PowerPC \(Including Embedded\) Developers Mail List" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Tue, Sep 21, 2004 at 11:15:20AM +0200, Marius Groeger wrote: > On Mon, 20 Sep 2004, Matt Porter wrote: > >>Did you disable CONFIG_VT, if it was enabled? Otherwise you need to > >>pass console=ttyS0 > > > >and on recent kernels, you need console=ttyS0,9600 on boards like > >this that use 9600 baud. Baud rate used to default to 9600, but > >no longer. > > So what IS the default then? Until today, I thought you don't necessarily > need a console= argument at all. See Documentation/serial-console.txt: > > If no console device is specified, the first device found capable of > acting as a system console will be used. At this time, the system first > looks for a VGA card and then for a serial port. So if you don't have a > VGA card in your system the first serial port will automatically become > the console. > > Are you saying that you should always pass console=...? Double checking my facts here, it's not CONFIG_VT per-se, but CONFIG_VT_CONSOLE. The problem is that VT_CONSOLE will register before anything else, even if no video hardware is found. Now getting a bit simplistic, if you don't want VT_CONSOLE, you don't want VT, so... -- Tom Rini http://gate.crashing.org/~trini/