From: "Zviad O. Giorgadze" Date: Wed, 06 Oct 2004 07:39:56 +0000 Subject: [LARTC] What is the reccomended minimum rate for leaf htb class for accurate operation? Message-Id: <20041006073827.5C1826CB7C7@mail.caucasus.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi, I'm trying to setup QoS in my TSL box. Following to mailing list reccomendations I changed PSCHED_CPU but can't get accurate shaping with HTB. I have disabled HYSTERESIS also (by setting it to 0). I have Intel Celeron 1.8Mhz (TSC supported I think). ******** My script ****** tc qdisc add dev eth0 root handle 1: htb default 22 r2q 10 # Class corresponding interface throughput tc class add dev eth0 parent 1: classid 1:1 htb rate 100mbit ceil 100mbit # Class for GLOBAL traffic tc class add dev eth0 parent 1:1 classid 1:20 htb rate 115kbit ceil 1mbit # Classes for PC-s tc class add dev eth0 parent 1:20 classid 1:21 htb rate 48kbit ceil 1mbit prio 2 tc class add dev eth0 parent 1:20 classid 1:22 htb rate 24kbit ceil 1mbit prio 3 tc class add dev eth0 parent 1:20 classid 1:23 htb rate 12kbit ceil 1mbit prio 5 tc class add dev eth0 parent 1:20 classid 1:24 htb rate 12kbit ceil 1mbit prio 5 tc class add dev eth0 parent 1:20 classid 1:25 htb rate 12kbit ceil 1mbit prio 5 tc qdisc add dev eth0 parent 1:21 handle 21: pfifo tc qdisc add dev eth0 parent 1:22 handle 22: pfifo tc qdisc add dev eth0 parent 1:23 handle 23: pfifo tc qdisc add dev eth0 parent 1:24 handle 24: pfifo tc qdisc add dev eth0 parent 1:25 handle 25: pfifo # Put flow to corresponding classes tc filter add dev eth0 protocol ip parent 1: u32 match ip dst 192.168.0.1 flowid 1:21 tc filter add dev eth0 protocol ip parent 1: u32 match ip dst 192.168.0.2 flowid 1:22 tc filter add dev eth0 protocol ip parent 1: u32 match ip dst 192.168.0.3 flowid 1:23 tc filter add dev eth0 protocol ip parent 1: u32 match ip dst 192.168.0.4 flowid 1:24 tc filter add dev eth0 protocol ip parent 1: u32 match ip dst 192.168.0.5 flowid 1:25 ******** End of script ********* What is the reccomended minimum rate for leaf htb class for accurate operation? Can I change somesing in my script to get more accurate results? Regrads, Zviad _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/