From: Peter Volkov Alexandrovich Date: Tue, 09 Nov 2004 10:09:13 +0000 Subject: Re: [LARTC] ip route nat. NEED help. Message-Id: <200411091309.13506.torre_cremata@mail.ru> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Hello. I need your help. The problem is I can not make route nat working with kern= el=20 2.6 although in 2.4 everthing works perfectly. I forced to have 2.6 kernel = as=20 I need SATA. If this is the wrong list to ask question about this, please poke me in the= =20 right one. So. I have router with two network cards: eth0(192.168.1.10) and eth1 (192.168.2.150). Kernel is 2.6.8.1. In the kernel all options and suboption= s=20 concerning "IP: advanced router" are enabled. I want to map computer in=20 192.168.2.0/24 subnet with IP 192.168.2.5 =9Aon 192.168.1.17 in 192.168.1.0= /24=20 subnet. I am not an artist but may be this graph can illustrate my situation: =9A =9A =9A =9A =9A =9A =9A192.168.1.0/24<..... nat =9A....>192.168.2.0/24 <192.168.1.1>-----<192.168.1.10>router<192.168.2.150>-----<192.168.2.5> =9A =9A =9A =9A =9A =9A =9A =9A =9A =9A =9A =9Aeth0 =9A =9A =9A =9A =9A =9A= =9A =9Aeth1 =9A =9A =9A =9A =9A =9Ahost i want =9A =9A =9A =9A =9A =9A =9A =9A =9A <192.168.1.17>----------nat------------= > =9A =9Ato map =9A =9A =9A =9A =9A =9A =9A =9A =9A dummy address =9ASo following ip-cref written by Alexey Kuznetsov first of all I issue th= e=20 command: nat router # ip route add nat 192.168.1.17 via 192.168.2.5 Now my router answers ARP for 192.168.1.17 and recieves the packets for it.= =20 Then it ever route them from eth0 to eth1 BUT it does not nat destination i= p=20 address. Look what one can see using tcpdimp! I ping 172.16.1.17 from=20 192.168.1.1: nat router # tcpdump -ni eth0 05:49:19.085838 arp who-has 192.168.1.17 tell 192.168.1.1 05:49:19.086938 arp reply 192.168.1.17 is-at 00:0c:29:od:85:04 05:49:19.692799 IP 192.168.1.1 > 192.168.1.17: icmp 64: echo request seq 1 AT the same time on eth1: nat router # tcpdump -ni eth0 05:49:19.692837 IP 192.168.1.1 > 192.168.1.17: icmp 64: echo request seq 1 My route table is Ok.=20 nat router # ip route 192.168.2.0/24 dev eth1 proto kernel scope link src 192.168.2.250 192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.10 127.0.0.0/8 via 127.0.0.1 dev lo scope link So why the packet that should be DNATed is not and how could packet that=20 should be sent to eth0 sent to eth1? Is there any other possibility to nat 192.168.2.5 on 192.168.1.17? The last question what is with "IP: fast network address translation" in 2.= 6.9=20 kernel? Why it is absent? Thank you in advance, _____________ Peter. P.S. I need your help to find sollution. Otherwise there is a possibility f= or=20 my employer can dismiss me. P.P.S. below is also my letter with the same problem. No one answered it.:( On Tuesday 26 October 2004 20:49, =F0=C5=D4=D2 =F7=CF=CC=CB=CF=D7 =9Awrote: > All worked with 2.4 kernel, but when I have to move to 2.6.8.1 it's not. > > I'm using "ip route nat 231.222.222.111 via 172.16.1.13" to substitute in= et > address 231.222.222.111 on 172.16.1.13 during routing. Look at the output: > _____________ > myhost log # ip route list table local > broadcast 127.255.255.255 dev lo =9Aproto kernel =9Ascope link =9Asrc 127= .0.0.1 > local 172.16.0.1 dev eth1 =9Aproto kernel =9Ascope host =9Asrc 172.16.0.1 > broadcast 172.16.0.0 dev eth1 =9Aproto kernel =9Ascope link =9Asrc 172.16= .0.1 > broadcast 231.222.222.111 dev eth0 =9Aproto kernel =9Ascope link =9Asrc > 231.222.222.111 broadcast 231.222.222.111 dev eth0 =9Aproto kernel =9Asco= pe > link =9Asrc 231.222.222.111 local 231.222.222.111 dev eth0 =9Aproto kerne= l=20 > scope host =9Asrc 231.222.222.111 broadcast 172.16.255.255 dev eth1 =9Apr= oto > kernel =9Ascope link =9Asrc 172.16.0.1 broadcast 127.0.0.0 dev lo =9Aprot= o kernel > =9Ascope link =9Asrc 127.0.0.1 nat 231.222.222.111 via 172.16.1.13 =9Asco= pe host > local 127.0.0.1 dev lo =9Aproto kernel =9Ascope host =9Asrc 127.0.0.1 > local 127.0.0.0/8 dev lo =9Aproto kernel =9Ascope host =9Asrc 127.0.0.1 > > myhost log # ip rule > 0: =9A =9A =9Afrom all lookup local > 323: =9A =9Afrom 172.16.1.13 lookup main map-to 231.222.222.111 > 32766: =9Afrom all lookup main > 32767: =9Afrom all lookup default > _______________________ > > So I'm trying to translate local address 172.16.1.13 on 231.222.222.111. > > And that was working under 2.4 kernel. But now I have to move to 2.6 kern= el > and now it's not working. > > I've used this commands: > ip route add nat 231.222.222.111 via 172.16.1.13 > ip rule add prio 323 from 172.16.1.13 nat 231.222.222.111 > > !!! To be sure that it is kernel problem I've added this two rules in my > FORWARD chain in the very beginning: iptables -I FORWARD -s 172.16.1.13 -j > LOG > iptables -I FORWARD -d 231.222.222.111 -j LOG > > Look I have packets that should not be there: > Oct 27 00:30:04 rcline IN=3Deth1 OUT=3Deth0 SRC=172.16.1.13 DSTd.12.161.1= 85 > LENH TOS=3D0x00 PREC=3D0x00 TTL=127 IDC039 DF PROTO=3DTCP SPT=1923 DPTQ90 > WINDOWe535 RES=3D0x00 SYN URGP=3D0 Oct 27 00:30:04 rcline IN=3Deth0 OUT= =3Deth1 > SRC=83.102.131.142 DST#1.222.222.111 LEN=84 TOS=3D0x00 PREC=3D0x00 TTLY > ID)90 DF PROTO=3DICMP TYPE=3D8 CODE=3D0 ID"310 SEQ)91 > > No substitution of niether destination, nor source adresses!!! > > Please help me to make this working. I've tried 2.6.9 kernel, but It seems > there is no "IP: fast network address translation". Why. Is feature alrea= dy > deprecated? _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/