From: Stef Coene Date: Sat, 13 Nov 2004 17:00:52 +0000 Subject: Re: [LARTC] What determines DROP versus delay ("BACKLOG")? Message-Id: <200411131800.53006.stef.coene@docum.org> List-Id: References: <418D2AA6.68F2871C@iswest.com> In-Reply-To: <418D2AA6.68F2871C@iswest.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org On Saturday 06 November 2004 20:48, gypsy wrote: > HTB: > > class htb 1:40 parent 1:1 leaf 40: prio 3 rate 358Kbit ceil 529Kbit \ > burst 6Kb cburst 2260b > Sent 145871726 bytes 97293 pkts (dropped 69, overlimits 0) > rate 56741bit 37pps backlog 23p > lended: 77429 borrowed: 19841 giants: 0 > > I would like to increase "backlog" because I think that would decrease > "dropped". 23 packets of 1500 bytes each is only 34,500 bytes. IMO, > there could be up to 64K bytes. > > 1) What determines backlog? I'm not sure, but backlog means packets i nthe queue ready to send. You ne= ed=20 backlog so htb can work. Backlogs means there are enough packets for htb t= o=20 work. > 2) How can it be altered? I't can't. > 3) Am I on the right track here? I'm afraid not. Stef --=20 stef.coene@docum.org =A0"Using Linux as bandwidth manager" =A0 =A0 =A0http://www.docum.org/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/