From: Wolfgang Denk <wd@denx.de>
Date: Fri, 19 Nov 2004 16:31:04 +0100
Subject: [U-Boot-Users] u-boot can not boot after change flashdisk from 8M to 16M 
In-Reply-To: Your message of "Fri, 19 Nov 2004 06:46:57 PST."
             <20041119144657.69263.qmail@web53407.mail.yahoo.com> 
Message-ID: <20041119153109.E193AC1430@atlas.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

In message <20041119144657.69263.qmail@web53407.mail.yahoo.com> you wrote:
> 
>   Because need more flash disk space, I replace
> ppc405ep board flashdisk 8M (intel 28F640j3
> 8MByte=64Mbite= 128k x 64) to 16M flashdisk (intel
> 28F128j3 16Mbyte=128Mbit=128k x 128). 

And why are you posting the very same message twice???

Don't do that! Once is enough.

>  where should I chnage in the u-boot source code from 
> 8M flash memory to 16M flash memory?   

memory map / link address / flash driver.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If something is different, it's either better or worse,  and  usually
both.                                                    - Larry Wall