From: Stef Coene Date: Tue, 23 Nov 2004 18:56:31 +0000 Subject: Re: [LARTC] burst question Message-Id: <200411231956.31488.stef.coene@docum.org> List-Id: References: <20041118192728.7613440f.mailinglists@lucassen.org> In-Reply-To: <20041118192728.7613440f.mailinglists@lucassen.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org On Monday 22 November 2004 00:17, richard lucassen wrote: > On Thu, 18 Nov 2004 22:50:17 +0100 > Stef Coene wrote: > > [..] > > > > Q4: I want this class to be able to allow 400Kbit burst during 3 > > > seconds. What value should I give to the burst parameter? Is this > > > 400/160*1803E07b? > > > > 400kbit * 3s =3D 1200kbit. > > You can try this, but htb burst is not made for this. It is made for > > burst of a few k. > > So a burst of 20k means the next 20kbit waiting in the queue will be > sent in one burst before switching to another queue. This also means > that this block of 20kbit is sent full speed over the line and it is not > limited by any ceiling or whatsoever. > > Right or wrong? Wrong. There are 2 bursts: a burst for the rate and a cburst for the ceil.= =20 So if you have a burst, it's still checked against the ceil. Check out http://www.docum.org/docum.org/tests/htb/burst/ for some tests. Stef --=20 stef.coene@docum.org =A0"Using Linux as bandwidth manager" =A0 =A0 =A0http://www.docum.org/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/