From: Stef Coene Date: Wed, 24 Nov 2004 22:20:18 +0000 Subject: Re: [LARTC] Can I add the permanent ip address on an interface ? Message-Id: <200411242320.18520.stef.coene@docum.org> List-Id: References: <20041124100818.89517.qmail@web51606.mail.yahoo.com> In-Reply-To: <20041124100818.89517.qmail@web51606.mail.yahoo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org On Wednesday 24 November 2004 11:08, ngo giang wrote: > Hello , > > I used Vmware 4.0 to setup a virtual linux network . I added a new > virtual PC and therefore I need to add a NIC on old virtual PC . I setup > the ip address of this NIC by using the command : > > ip addr add 192..../ 24 dev eth1 > > but when I restart the computer the ip address of this NIC was not saved= . > And the tc script I used was not save when I turn off my computer , too . > > Could you tell me how can I setup the permanent ip address and permane= nt > tc (qdisc , filter , class) on the interfaces ? No, because this depends on the distribution you use. Plz consult the=20 documentation of your distribution to get the info you need. Stef --=20 stef.coene@docum.org =A0"Using Linux as bandwidth manager" =A0 =A0 =A0http://www.docum.org/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/