From: "Carlos Alperin" Date: Thu, 25 Nov 2004 19:00:21 +0000 Subject: [LARTC] Shapping traffic Message-Id: <20041125190021.M26138@www.senecacom.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Dear sirs, I have the following situation: I need to prioritize traffic as this: Higher priority UDP traffic from VoIP servers, Medium priority http port 80, low priority SMTP & POP ports 25 & 110. Now, we run OSPF & BGP with Zebra routers on at least 8 different routers before going out to the Backbone provider. As I understand, the problem with Zebra is that only hold 1 iptable. If that is correct, this affect my capability of define QOS? Any suggestions? Sorry if this question is very elemental, but I 'm a rockie on LARTC Thanks in advance for your help Carlos Alperin -- Open WebMail Project (http://openwebmail.org) _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/