From: Jason Boxman Date: Mon, 29 Nov 2004 02:55:30 +0000 Subject: Re: [LARTC] PARAMs Message-Id: <200411282155.30529.jasonb@edseek.com> List-Id: References: <005501c4d3b4$cbfc4c60$4a0710ac@d3lta> In-Reply-To: <005501c4d3b4$cbfc4c60$4a0710ac@d3lta> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Friday 26 November 2004 07:38, James Lista wrote: > buddies, > > I understood it is adding a filter to go to class $VIP in device wan (eth0 > in my case)........ > I also understant that "match ip protocol 6" <-- 6 = TCP - I see that in > /etc/protocols, but why that 0xff after it ? > > can someone explain the rest of the params ? I donnot understant those > params like prio 10, u32, match u16 0x0000 0xffc0, etc ! This is the only documentation I have been able to track down in my travels about the u32 classifier[1]. I don't know why there's an 0xff after match 'ip protocol 6'. You get the same thing for '[d|s]port 53 0xff' matches, too. I think those keywords are syntactic sugar. [1] http://lartc.org/howto/lartc.adv-filter.html -- Jason Boxman Perl Programmer / *NIX Systems Administrator Shimberg Center for Affordable Housing | University of Florida http://edseek.com/ - Linux and FOSS stuff _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/