From: riya punjabi Date: Mon, 29 Nov 2004 00:56:48 -0800 (PST) Subject: [U-Boot-Users] U-boot on OMAP 1510 Innovator board Message-ID: <20041129085648.17604.qmail@web41005.mail.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Thanks for the reply. As you said re-assigning TEXT_BASE won't work. But why? Truly speaking I don't know exactly how the U-boot booting process happens, I mean i don't know how it is loaded in differrent stages and where.... Can you plz suggest some tutorial for the same....I couldn't find one. I had changed TEXT_BASE since I assumed that after power-on the system reads from location 0x00000000. So I had changed the TEXT_BASE address so that the system would read from location 0x00000000 where I have placed my u-boot. You had also mentioned that u r using a different tool chain. Which one is that? It would be really helpful for me if you list out the steps for building u-boot and the memory switch settings. Also it would be great if you can specify how to convert a .srec or .bin file to .m0 file. Also, what's the difference between booting through rrload and booting through U-boot. --Riya. >Riya- > >I'm not sure about the rest of the procedure, as I use a >different >toolchain >and hardware, but I see a serious problem with the >following step: > >5. vi board/omap1510inn/config.mk > Here I have changed the line: > TEXT_BASE = 0x11080000 > Replaced it with: > TEXT_BASE = 0x00000000 > >In doing this, you're re-assigning TEXT_BASE, part of >the memory U-Boot >runs >in, from RAM to Flash memory. This simply won't work. >Do you have a >reason >to be changing the address it uses, or were you >intending to manipulate >a >different aspect of memory that might be governed by >some other >constant we >could help you with? > >-Michael Bendzick __________________________________ Do you Yahoo!? The all-new My Yahoo! - What will yours do? http://my.yahoo.com